Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Peter Cane on December 02, 2022, 01:23:41 AM

Title: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 02, 2022, 01:23:41 AM
I have built a guillotine that will cut leather clack valves to the exact width and length every time.
I find this tool very useful to make my own valves.
So to get straight to the point...
Why only Italian Leather?
Let's get into the physics of this.
Sorry...I am in Australia with a good leather shop down the road so I have questions and options to Italian leather.
Okay..first off..leather only stretches in one direction.
Why?
An animal moves ( like us) in all directions.
But it is a fact that leather stretches in one direction.
So let's call this the " grain"...bit like wood and it's strength.
I have cut valves and pallet leather and have noticed a slight curl to not lying flat.
This is caused by not cutting the leather on the grain and also incorrect storage ( ie rolled leather ) which is normal unless you need it flat for our purposes.
Also, I have noticed that a batch of my pallet leathers have a distinct arch to them as in they do not lie flat.
So to remedy this....I need to store my leathers flat.
Maybe this is a secret Italian recipe to having leathers that consistently lie flat.
So now to the animal.
What animal does Italian valve leather come from?
Sense tells me that the animal must be , say, a lazy kind that does not exert itself to  too much so that it's skin ( leather) is not subject to too much stretching.
So what animal does Italian leather come from?
A pig?
I am sure Italian leather is not rocket science.
My guess is in the  way it is stored ( pressed between planks of wood under slight pressure) and how ( grainwise) it is cut.
So we are down to three areas here.
The Animal
The Cut.
Storage.
If I am totally wrong about this I would like to learn from you.
If you have done the full course or spent years studying leather types I would very much like to know differently.
When I read " Italian Leather"..... I also read..." Ahh... someone using " Italian Leather " to make megga bucks.
What's the big game here?
Pete
Title: Re: Italian Reed valve DIY Alternatives
Post by: Pete Dunk on December 02, 2022, 04:10:45 AM
I can’t answer your questions about Italian leather but given the subject matter of your post you may find this video interesting, if a little long winded.


https://youtu.be/HY1W_t0-0gI (https://youtu.be/HY1W_t0-0gI)
Title: Re: Italian Reed valve DIY Alternatives
Post by: Theo on December 02, 2022, 07:08:35 AM
I think that the answer to the question  why “Italian” leather is simply that most accordion factories are in Italy and they select from what is available locally.
I believe that leather for reed valves is usually calf.


As well as animal, cut and storage there is huge variation in the process of making leather so that the same skin could end op as a firm stiff leather or o soft flexible leather depending on how it is processed. So if you find something that works well then use it. 

Title: Re: Italian Reed valve DIY Alternatives
Post by: pete /acorn on December 02, 2022, 08:12:42 AM
I would look at Kangaroo leather and have a word with the people involved with its proccessing.
It is an incredible product,very strong and soft
Title: Re: Italian Reed valve DIY Alternatives
Post by: Chris Ryall on December 02, 2022, 08:31:53 AM


   Hmmm, Should I link to this marsupialisation of valves in our 21st Century Box (http://forum.melodeon.net/index.php?topic=7840.msg97541#msg97541) ideas archive, or not? 🤔
Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 02, 2022, 09:47:59 AM
I can’t answer your questions about Italian leather but given the subject matter of your post you may find this video interesting, if a little long winded.


https://youtu.be/HY1W_t0-0gI (https://youtu.be/HY1W_t0-0gI)
Hi Peter.
Yes my guillotine is very similar, works like that one does but not so many adjustments.
Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 02, 2022, 09:53:28 AM
I think that the answer to the question  why “Italian” leather is simply that most accordion factories are in Italy and they select from what is available locally.
I believe that leather for reed valves is usually calf.


As well as animal, cut and storage there is huge variation in the process of making leather so that the same skin could end op as a firm stiff leather or o soft flexible leather depending on how it is processed. So if you find something that works well then use it.
Theo. Thanks.
I had not thought of the obvious in that most accordion factories are in Italy and for them to use local hides.
What they do in the processing is anybody's guess.

Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 02, 2022, 09:57:24 AM


   Hmmm, Should I link to this marsupialisation of valves in our 21st Century Box (http://forum.melodeon.net/index.php?topic=7840.msg97541#msg97541) ideas archive, or not? 🤔
Yep!
A few of my boxes are full of Kangeroo valves.
Title: Re: Italian Reed valve DIY Alternatives
Post by: Chris Ryall on December 02, 2022, 10:06:22 AM


    Done!   http://forum.melodeon.net/index.php?topic=7840.msg343775#msg343775
Title: Re: Italian Reed valve DIY Alternatives
Post by: Theo on December 02, 2022, 10:59:46 AM

A few of my boxes are full of Kangeroo valves.

Does it give the tunes more bounce?😁😁
Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 02, 2022, 11:49:33 AM

A few of my boxes are full of Kangeroo valves.

Does it give the tunes more bounce?😁😁

Yep...
Specially when you play Hip hop.
Title: Re: Italian Reed valve DIY Alternatives
Post by: diatonix on December 04, 2022, 03:04:22 PM
Most leather valves are made from kid leather. As far as I know most of it comes from (Northern) India.
Title: Re: Italian Reed valve DIY Alternatives
Post by: rees on December 04, 2022, 08:19:20 PM
I seem to remember someone (another Italian old-timer) telling me that the leather for the valves comes from a particular herd/flock of goats/sheep on a particular slope on a particular hill somewhere in Italy!
Possibly the same person who told me that reed-wax is 50% wax, 50% resin and 5% olive oil. 105% turbo-wax!
Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 06, 2022, 07:59:42 PM
Most leather valves are made from kid leather. As far as I know most of it comes from (Northern) India.

That's confused me even more especially when we read " Italian leather" on the packets or marketed as such.
I think the criteria with leather clack valves is not with the animal it came from but .
1. Thickness.
2. Smoothness on the inside for airtightness.
3. Spring.
4. Stiffness.
5. Importantly. How it is cut as leather stretches only in one direction. When cut on the bias it will Start to curl.
6. How it is stored ie flat.

Title: Re: Italian Reed valve DIY Alternatives
Post by: Theo on December 06, 2022, 08:06:04 PM
The leather trade is global like so many other things these days.  Raw or semi-tanned hides are traded internationally, sometimes re-tanned in another country, and may be processed in other ways in other countries. Tanneries that use local skins and do the complete processing to finished leather are a rarity nowadays.
Title: Re: Italian Reed valve DIY Alternatives
Post by: John MacKenzie (Cugiok) on December 06, 2022, 08:27:22 PM
In my days as an international truck driver leather/skins were a regular load, from pallets of plastic wrapped wet cow hides known as 'Blues' to salted sheepskins, and lamb pelts, all of which went to Italy, I have loaded them all. Smelly bloody things they are too.

SirJohn
Title: Re: Italian Reed valve DIY Alternatives
Post by: Kimric Smythe on December 06, 2022, 09:14:05 PM
As I understand it, it is the type of leather, where it is cut from the hide, and importantly how it is tanned. You are looking for a process that gives you a certain sort of "spring" to the leather. I have been told that a lot of this has been sent offshore many years ago due to the nasty chemicals involved, add to this the low demand and you get quality control problems.
Title: Re: Italian Reed valve DIY Alternatives
Post by: Henry Piper on December 07, 2022, 09:17:42 AM
I'm not sure there is such a thing as "Italian Leather" as in the phrase "Italian Leather Valves" using the principle of Occams Razor I think it probably simply means Leather Valves Made or sourced from Italy, where a sizeable proportion of accordions and accordion parts originate!!.
Title: Re: Italian Reed valve DIY Alternatives
Post by: Peter Cane on December 07, 2022, 07:27:11 PM
This gets interesting in itself.
We have had John delivering blues ( raw un
tanned pelts) from UK to Italy where they are specially tanned for accordion valves and when done become Italian leather.
Mhhhh....Much head scratching going on here.
So is actually " not" Italian Leather.
At least I can say my valves are Australian animal and Australian tanned all at the same shop which is an annex to the tannery.
On my next visit I will ask them what chemicals they use.
SimplePortal 2.3.5 © 2008-2012, SimplePortal