Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Richard Friedman on December 26, 2022, 08:04:23 PM
-
Clearly, I don't know the correct terminology for the parts of this instrument. I have it apart to make some repairs and notice that many of the reed flaps are bent away from the reeds that they are supposed to seal. What is the normal remedy?
Thanks
Richard
-
To me they don't look terrible. Leather valves can have developed a curve when static yet still be able to close very quickly once air is going past them.
But the generally preferred solution is new valves.
The thing that makes the biggest difference to leakage is the sealing of the pallets.
-
These flaps are called valves, their purpose is to prevent air passing in the wrong direction when the insturment is played, there will always be a least two reeds in each air chamber one reed sounding on the "push" the other on the "pull". If the valves are bent to the extent of yours they will be very slow to close and will prevent the other reed in the chamber to speak quickly,if at all. These valves need to be replaced, which may well then need the reeds to be tuned due to the different air flows created. I'm sure an expert will be along very soon to correct my views. You did not mention the exact make or type of instrument we are speaking of, but if it is of value it is well worth getting this work done by an expert fetteler of which many contribute to this forum. Regards Chris D
-
You need to replace the valves, in addition the wax looks really old so is also probably shot. The sort of good news is you would have to take the reeds off to replace the inside valves so would have to rewax anyway.
-
You need to replace the valves, in addition the wax looks really old so is also probably shot. The sort of good news is you would have to take the reeds off to replace the inside valves so would have to rewax anyway.
Someone made some very helpful hot rod a hohner videos on how to do these sorts of jobs :D
Rewaxing is definitely covered, as part of converting to 4th button start and possibly elsewhere. I can't remember if revalving is.
They are specifically about pokerworks, but the principles are transferable.
-
Yes, they are great videos. Here is the one where you are taught how to tune, *using a tuning table*…
https://youtu.be/xy8dizq8Tks
-
You can find all my Hot Rod Your Hohner videos HERE (https://www.youtube.com/playlist?list=PLDoaFL1pYKYqVmiUYp7PPU7JJYsYo34f1)