Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Arnold on February 16, 2023, 05:51:27 PM

Title: Which filler for thumb strap holes?
Post by: Arnold on February 16, 2023, 05:51:27 PM
Hi all, just wondering, when you remove the thumb strap from a plastic Hohner finger board, what is the best type of filler to use to fill the hole that preferably matches the look of the original fingerboard?.. thanks
Title: Re: Which filler for thumb strap holes?
Post by: Theo on February 16, 2023, 06:00:23 PM
I use plastic blanking plugs like these.  It's almost impossible to get filler that is a good enough match to be invisible.  The plugs are neat and quick.  You might have to open out the hole a bit to get a good fit.

https://www.ebay.co.uk/itm/222268620243
Title: Re: Which filler for thumb strap holes?
Post by: Lester on February 16, 2023, 06:06:27 PM
I use these superglued in place

https://www.diy.com/departments/b-q-black-plastic-screw-cap-dia-4mm-pack-of-20/245420_BQ.prd (https://www.diy.com/departments/b-q-black-plastic-screw-cap-dia-4mm-pack-of-20/245420_BQ.prd)


https://youtu.be/2XSTbr9PzGE?t=385
Title: Re: Which filler for thumb strap holes?
Post by: rees on February 16, 2023, 06:38:41 PM
I use the same type of widgets as Theo. A very simple fix.
Title: Re: Which filler for thumb strap holes?
Post by: Arnold on February 16, 2023, 06:50:35 PM
Thanks for responses. Do any of these sit flush with the rest of the finger board though? Or do you just accept the bobbly bits?..
Title: Re: Which filler for thumb strap holes?
Post by: rees on February 16, 2023, 06:51:11 PM
They are slightly domed.
Title: Re: Which filler for thumb strap holes?
Post by: Dick Rees on February 16, 2023, 07:08:19 PM
I find such "bobbly bits" to be of use as a tactile hand position reference.  In fact, I either ignore the thumb strap if it's an old leather one or clip off the stiff synthetic type.

In playing with a single strap, using the bulgey bit can help to enhance the bracing triangle of the two strap anchors by acting as a "third leg".
Title: Re: Which filler for thumb strap holes?
Post by: Rog on February 16, 2023, 10:36:34 PM
Ready made plugs..great idea. I’ve used thermoplastic, and also Milliput epoxy putty…which doesn’t need to be domed. It sits flush if that’s what you want.
Title: Re: Which filler for thumb strap holes?
Post by: Winston Smith on February 17, 2023, 07:18:10 AM
Why fill them, they're not unsightly?
Title: Re: Which filler for thumb strap holes?
Post by: Arnold on February 17, 2023, 09:16:41 AM
I find such "bobbly bits" to be of use as a tactile hand position reference.  In fact, I either ignore the thumb strap if it's an old leather one or clip off the stiff synthetic type.

In playing with a single strap, using the bulgey bit can help to enhance the bracing triangle of the two strap anchors by acting as a "third leg".

That’s very reassuring Dick, thanks. You are clearly a man of many talents  ;D



Why fill them, they're not unsightly?

Trypophobia?  ???
Title: Re: Which filler for thumb strap holes?
Post by: Winston Smith on February 17, 2023, 09:40:26 AM
"Trypophobia?"

Wow! I'm impressed, lol.
Title: Re: Which filler for thumb strap holes?
Post by: Arnold on February 17, 2023, 09:55:08 AM
I only have a very mild case admittedly, which manifests as a slight preference for filling in holes left by detached thumb straps  ;D
Title: Re: Which filler for thumb strap holes?
Post by: Graham Spencer on February 17, 2023, 03:50:02 PM
Why fill them, they're not unsightly?

My feelings exactly; I just leave the holes as holes - generally they're neat and smooth-edged and I honestly don't notice them when playing. I guess I'd probably notice sticky-up plugs?  Horses, courses .......... ;)
SimplePortal 2.3.5 © 2008-2012, SimplePortal