Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Chris Deis on March 20, 2023, 03:20:58 AM
-
Hello,
Sure I'm demonstrating my ignorance of music theory here, but could someone kindly explain or point me to a reference or method for identifying missing reeds from the bass chord reed block?
What I am trying to explain is, I am restoring a mid-1950's Paolo 2-voice instrument, with 8 bass buttons. 7 reeds (14 pairs) are missing from this bass chord block. (photo). I referenced the keyboard layout for my instrument (21 button F/Bb with low notes) which is grand for the treble side, but it does not include the reeds Paolo used on this block.
I'm hopeful there is documentation on this, or someone with a similar instrument can help me fill in the missing information, so I can continue to progress. I searched the forum to no avail.
I made up a little table, (attached) showing the 9 reed pairs left intact on the block, perhaps somehow the rest can be identified? The small type is Hz of the notes - out of tune of course, but provides an indication of the octave.
Thanks in advance, I'm a bit stymied on how best to proceed.
Chris
-
What keys is the box in?
-
You may want to start by reading up on how major and minorr chords are formed. In a major chord you will have the root note (same as the bass it’s paired with). The third and the fifth.
So in the key of F you have the following notes:
F G A Bb C D E
So the F chord has the first third and fifth notes of the scale: F A C
similarly for other chords starting at a different place on the scale, for example C E G for a C major chord.
You also need to learn the difference between a major and a minor chord. For that I suggest you consult a book on music theory.
That should get you started.
-
It would be helpful to see a photo of the bass mechanism too.
But there is one thing I can't figure out. On the left there is a B and A both on the push. There isn't a chord that would appear on a 8 button box that uses these notes together.
I may be missing something that would be made clear by a photo, or one of those notes is wildly out of tune.
-
I may be missing something that would be made clear by a photo, or one of those notes is wildly out of tune.
A previous owner may have have put reeds in the wrong place
-
Counting from the left of your diagram positions 2,4 6 and 8 are the fundamentals , positions 1, 3, 5, 7 are the thirds and fifths
-
This is what I would expect to find. The B at the left is incorrect, should be C. Presumably the reed has gone flat for some reason,
-
Thank you all for your kind assistance. You have put my feet on the path and I think I can get this sorted out now. Not surprising that the B should be a C, as Theo and Squeaky Pete pointed out. Many of these reeds are out 50cents or more, so I had to 'best guess'.
Just to verify I understand this, on the melnet keyboard layout F/Bb, some of the bass chords are noted with a + symbol. So this would indicate major chord? Accordingly, a - symbol for minor? Ex: D+ / G-
Lester - It's an F/Bb box, 2-voice from mid 50's (about as old as I am)
Squeaky Pete - I've attached a photo of the bass mechanism. Sure I'll be spending time figuring out how that works relative to the reed blocks / positions.
Very grateful to you all,
Chris