Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: fiachramp on May 08, 2023, 09:48:44 PM
-
Hello all,
I recently bought a Liberty wax pot from a supplier in Italy. It's the white and blue one. I'm finding it difficult to get the wax hot enough to run off the spoon. I've used a good few other wax heaters(tixor etc) with no issues but I leave this one heating for 30/40 minutes and it's still not hot enough! Anyone have any ideas? I'm using a European to 3 pin adapter for the plug, would that be causing a problem?
Thanks in advance,
Fiachra
-
What kind of wax are you using?
-
Hi Theo,
I bought it on Ebay. It came from Germany if my memory serves me right.
-
Plug adaptor can cause problems with high voltage items welders etc. Ebay either send it back as not fit or change the plug . If it was sold into the UK with a euro plug that alone is ilegal and a basis for return. All electrical ,items must come with a UK plug. I know they dont
-
The wax pot on the CariniDena site is perfect and purpose built for the job.
-
Plug adaptor can cause problems with high voltage items welders etc. Ebay either send it back as not fit or change the plug . If it was sold into the UK with a euro plug that alone is ilegal and a basis for return. All electrical ,items must come with a UK plug. I know they dont
Anything that connects to a plug socket (UK or EU type) uses exactly the same voltage.
High current devices can have problems with adaptors, but a wax pot is not a high current device, so I think it highly unlikely the adaptor is causing your problem. If it was then you would notice the adaptor itself getting hot when in use. That is something you can easily check.
If the pot was designed for use with reed wax then I think it must be faulty. If it is designed for other types of wax it may be designed to work at a lower temperature.
-
Thank you all for your input. It must be something I'm doing wrong. I'll try it again this evening and see how it goes and let you know. Thanks again.
-
I suspect it's a wax issue. Try and add a little more (vegetable-)oil.
-
Do you know the specificid temperature range of the heater? Is it like this one? If so the upper temperature is only 100 degrees, which is a bit borderline for some waxes
https://www.a mazon.co.uk/EPILWAX-Liberty-Epilator-Professional-Waxing/dp/B00C97KQ9M