Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: mChavez on May 31, 2023, 11:58:48 AM

Title: LHS Free bass mechanism?
Post by: mChavez on May 31, 2023, 11:58:48 AM
Hi All,

Is there any information (or at least detailed photos) of a simple (but high quality) LHS free bass mechanism that one can make himself? I.e. 1 button responsible for 1 pallet?

I've seen a very simple option where a brass rod gets wrapped around an axle, with one end connected to a pallet and another one being pushed by a button's push-rod, but I've got some concerns on the wrapping around the axle bit: do it too tight, and there's too much friction. Too loose, and the pallet will be wobbly and have a risk of not seating properly.
Perhaps, wrapping the rod around a brass bearing might be a better option?.. Open to any ideas.

Thanks!
Title: Re: LHS Free bass mechanism?
Post by: -Y- on June 01, 2023, 02:20:44 PM
Carini supplies at least one way of doing this, first you have this kind of part, that lifts the pallet:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/30150003-01.jpg

Notice that on the upper part, there is a flat section with a hole, you set this piece in:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/34213-01.jpg

This small part hosts the lever that goes into the button, that you lock with a screw at the desired position (it's quite easy to adjust the position of the rod then). It's that kind of rod:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/340018180-01.jpg

It's not really cheap per se (around 2€ per set) but it works.
Title: Re: LHS Free bass mechanism?
Post by: mChavez on June 01, 2023, 04:28:12 PM
Thank you very much.
Seems a bit over-engineered...

I think I might have answered my own question, as I found this photo.
(https://poigarmonika.ru/wp-content/uploads/2019/10/4556566654.jpg)

Essentially, it looks like a standard roller mechanism, but the rollers are short and stacked diagonally, so you can pack a small roller for every note into the box.
Title: Re: LHS Free bass mechanism?
Post by: -Y- on June 01, 2023, 08:37:47 PM
Seems a bit over-engineered...
It's just two rods connecting to each other really, but I'm glad you found what would suit you best, interesting diagonal layout!
On what box did you find it ?
Title: Re: LHS Free bass mechanism?
Post by: mChavez on June 02, 2023, 10:28:40 AM
Just a photo from the internet.
I believe this might be a Russian "Hromka" with an LHS register switch that allows switching 1 vs 2 voices through mechanical linkages, as opposed to the slider mechanism.

But I might be wrong.

The overengineering seems to be in how the rods are joined.
... Also, I will potentially be looking for about 52 notes with two buttons opening 1 pallet, which brings it to 104 rods and a EUR 208 bill :-[
SimplePortal 2.3.5 © 2008-2012, SimplePortal