Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: John Burks on July 09, 2023, 06:17:03 PM
-
A bit of a long shot but, does anybody have a drawing/template for an old fretwork type "lyre" grill? It does not have to be perfect. A simple drawing that I can use to help get the design right would be helpful. Size is 27.5cm x 11cm.
Thanks
John
-
I don't have a lyre type but I do have one of the other fretwork designs, which were used on some of the early Hohners. e.g. the 490
-
I have one from a 1920s/early 30s wooden grill. I’m away from home for the next week but I can get it out when I return.
-
Picture here of a grill I made with the template
https://theboxplace.co.uk/product/club-i/
-
Theo has the same generic pattern I have - but his is from a Hohner box, mine isn't.
Pete Dunk had one like this:
http://forum.melodeon.net/index.php/topic,23837.msg284069.html#msg284069
....which is maybe closer to a "Lyre" pattern?
-
Hi Peadar/Theo, many thanks for the input. It's been very helpful. I have downloaded the model 490 .pdf and will try to resize. If it's Ok Theo I would also really appreciate the one you have. I have to source the mahogany sheet so it will be a while until I start work. The box currently sports a bit of plywood covered in speaker material so its looking forward to a facelift (:)
Thanks
-
I’ll get it out next week when I’m back home.
I made the grill in the photo from mahogany veneered plywood. Solid timber is just too pretty be to spits along the grain. I coloured the veneer to match the rest of the box.