Melodeon.net Forums

Discussions => General Discussion => Topic started by: Fungusface on November 23, 2009, 02:00:04 PM

Title: What is name for Them
Post by: Fungusface on November 23, 2009, 02:00:04 PM
What is the name for what I call 5 couplers on my Sonola treble side and bass, someone said they are Registers, someone else said switches,
would be interested to know so when I advertise it people will know what Im speaking about.
Title: Re: What is name for Them
Post by: ACE on November 23, 2009, 02:50:01 PM
What is the name for what I call 5 couplers  on my Sonola treble side and bass, someone said they are Registers, someone else said switches,
would be interested to know so when I advertise it people will know what Im speaking about.

I think you answered your own question.
Title: Re: What is name for Them
Post by: Theo on November 23, 2009, 04:12:06 PM
Couplers seems to be the most common name in the UK.
Title: Re: What is name for Them
Post by: GbH on November 23, 2009, 05:18:59 PM
I must admit that I'm still confused about what the terms 'coupler' and 'register' really mean.  My own instrument has four possible RH sounds (reed combinations), which are selected via two thumb levers.  My own instinct would be to say that the instrument has four registers, but two couplers.  Is that right?  Or are are levers different to couplers, in which case does that mean I have no couplers?   ???

Maybe I should just call the levers 'thumb thingies' and leave it at that. 
Title: Re: What is name for Them
Post by: HallelujahAl on November 23, 2009, 06:34:47 PM
They were once described to me as 'teeth that change the tuning' - uh???
Title: Re: What is name for Them
Post by: GbH on November 24, 2009, 12:05:21 AM
Is it really the case that no-one can provide a straightforward answer to this?   ???
Title: Re: What is name for Them
Post by: triskel on November 24, 2009, 02:51:06 AM
What is the name for what I call 5 couplers on my Sonola treble side and bass, someone said they are Registers, someone else said switches,
would be interested to know so when I advertise it people will know what Im speaking about.

FWIW, I'd say it had 5 treble couplers, and 2 bass registers.
Title: Re: What is name for Them
Post by: Gandy on November 24, 2009, 08:44:31 AM
I would call it a "Stop" if it selected or deselected a single function, like the one-row Hohner where you pull out the combination of Stops that suit you at the time.   A "Coupler" if a single action selects a combination of reeds.   I think that's similar terminology for organs.
Title: Thanks
Post by: Fungusface on November 24, 2009, 10:37:10 PM
Thanks Everyone
SimplePortal 2.3.5 © 2008-2012, SimplePortal