Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Squeaky Pete on November 28, 2023, 05:47:56 PM

Title: New spring bending jig.
Post by: Squeaky Pete on November 28, 2023, 05:47:56 PM
I've been fiddling around with improving my spring bending method.
My old jig worked but there were a lot of things to adjust as I was using it and I wanted a smaller diameter pin for tighter winding.
So here is mk 2.5.
I've posted this on FB too.
https://youtu.be/6yx7PwepbBk?si=Gxh-ZKu3YDMEEB_V
Title: Re: New spring bending jig.
Post by: mChavez on June 06, 2024, 10:32:59 PM
If you google "Coil building for vapes" you end up with a very cheap but very effective spring winding kit that comes with several mandrels in different size (mine came with 6 in 0.5mm increments).
https://www.ebay.co.uk/itm/375044640595?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=CjwKCAjwvIWzBhAlEiwAHHWgvX6xN9wfXQ12_-H4M3IVeSiwdTY_FJaW8hW9-Y6MXmhYL8_uyFtMMBoC-tQQAvD_BwE (https://www.ebay.co.uk/itm/375044640595?var=0&mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338268676&toolid=10044&customid=CjwKCAjwvIWzBhAlEiwAHHWgvX6xN9wfXQ12_-H4M3IVeSiwdTY_FJaW8hW9-Y6MXmhYL8_uyFtMMBoC-tQQAvD_BwE)

Once the springs are made, it's quite handy for adjusting their tension too.

I'm hot-rodding an old soviet squeezebox right now, and the treble keyboard tension was 260g per key ( :o).
Dropped it to 120g by making new springs.

My only concern is that after two dozen springs, the alloy housing is looking a bit worn - I wonder how it will look after a hundred or two.
Otherwise, it's £6 well-spent.

Title: Re: New spring bending jig.
Post by: Rog on June 07, 2024, 03:48:39 AM
V good on both those posts!
SimplePortal 2.3.5 © 2008-2012, SimplePortal