Melodeon.net Forums
Discussions => General Discussion => Topic started by: Boxhead on December 05, 2023, 10:48:10 AM
-
Hi everyone,
Been looking for a suitable LH mic for my posh box ( CairdÃn) for ceili band use, have my eye on the T-Bone CC100. Looking at it I am finding it hard to imagine a non destructive, easily removable way of attaching it to the LH. Am not particularly handy and definitely don't want to be attacking the casework!
Anyone got any ideas, or suggest another suitable method /system? Must be reasonably priced , not bothered about wireless systems. Just using a 57 on the RH and its been great but my playing has changed over the last couple of years and I have decided that the LH really needs micing up.
Thanks in advance for any replies.
Boxhead :||:
-
I use a version of that T.Bone mic that has a big spring clip on it. There's nothing I can clip it to, but the back of the clip is has a big enough flat surface to put a self adhesive Velcro pad on it, and the matching Velcro pad is on the front of instrument case (one for each end.)
You might count that as attacking the casework: the pad doesn't look very pretty, and if I pulled it off it would probably leave a scar on the varnish.
An alternative I sometimes use is a SM57 on a stand for the RH, combined with a Microvox pickup for the bass end. The two are combined with a battery box of my own design, which has a volume control for the bass mic to set treble/bass balance. That's handy when there is a shortage of mixer channels, as it only needs 1 channel. The bass mic is permanently fixed in the LH end of the box and there is an RCA connector, but it's invisible to the audience in normal use. You can't get Microvox mics any more, but a home made equivalent would be an electret capsule soldered on to the end of the cable, with heatshrink sleeving round the joint.
-
After about 30 years of gigging and sessions my melodeon is now so battered that I had no qualms about screwing brackets for AKG C516s onto each end. I can understand that you feel protective about yours and want to avoid this. The Ovid flute clip has a velcro strap which might fit around the hand strap, but I've not tried it myself. I have fudged similar solutions using velcro cable ties, but not with that particular mic.
In the past I have used the T-bone CC 75, which has a spring clip which attaches to the strap. I now use a pair on my anglo concertina, mainly because they are the only ones I have found which I can clip to it (onto the hand straps) without needing to adapt the instrument. It seems good enough, at least in a noisy band context.
-
Whatever solution you use, a secure mount will, at best, require doing something permanent to the bass board (i.e., the bass case cover). Have you considered making, having made or purchasing from the supplier, a spare board that can be used for permanently attaching whatever solution you choose.
-
Thanks for these replies, much appreciated, Greg's comment about the bass board got me thinking that maybe some sort of velcro loop, like the ones for keeping cables tidy, going in and out of a couple of the air holes in the bass board may offer some kind of fixing point.
Keep em coming, I want to know all the options!
Cheers
Boxhead :||:
-
I've got one of these mics - my approach is to make 3D printed brackets (you can design them online and get a company to print them for you if you don't have a 3D printer). My original thought was to design a set of brackets for each box so they'd fit to any screw holes on individual boxes (bellows pins, straps brackets, etc), but I think it's every bit as effective to mount the brackets to your melodeon temporarily with masking tape. A bit of masking tape on the box, bracket on top of that, more masking tape holding the bracket in place - a system I've used for years to mount AKGs which have their own bracket. The T-Bone clips onto the 3D printed bracket.
Should have worked fine... then covid hit, and all gigs dried up. Sigh.
-
I would wrap a piece of metal around the stem such that you have a tail. Put a hole in that and use one of the feet screws to hold it.
I have clip-ons and I just have a sheet of plastic that sticks out from one of the feet and will hold the clip.
You'll need a screwdriver at every gig, obvs.
-
... I had no qualms about screwing brackets for AKG C516s onto each end.
I use one of those for the r/h side, attaching the bracket temporarily to the top of the treble cabinet with a plug of sticky tack (poster putty) from the local stationery shop. It comes off leaving no damage to stained or painted wood, or celluloid.