Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Steve C. on December 07, 2023, 10:57:56 AM
-
I came across Luke Hillmans Pokerwork with duck call installed by Kimric Smyths shop:
https://www.youtube.com/watch?v=4OSF9kiZuMA
Reminds me of an English Concertina I once had with sort of a bird whistle, a Wheatstone. Way back, 70's. Never could get it to work.
Does anyone have other novelty boxes? I have heard there are sirens but never seen one.
Not sure this is a good idea but is kind of a fun surprise. With Lukes playing it is, anyway.
"Course there is always the tire pump.....
-
I’d like a button which says “Sorry! Can I start again?â€
-
I had a instrument in awhile back that had whistles.
Building the duck call was a challenge since the air pressure in an accordion is way lower than a persons breath. I had to make a couple of duck calls to get it right. later I figured out how to make a double ended one that would sound in both directions.
-
I had a instrument in awhile back that had whistles.
Building the duck call was a challenge since the air pressure in an accordion is way lower than a persons breath. I had to make a couple of duck calls to get it right. later I figured out how to make a double ended one that would sound in both directions.
Sounds very clever.
Do you get the doppler effect on the quack tones as the duck quacks in one direction and leaves in the other direction? :D
-
I had a instrument in awhile back that had whistles.
Building the duck call was a challenge since the air pressure in an accordion is way lower than a persons breath. I had to make a couple of duck calls to get it right. later I figured out how to make a double ended one that would sound in both directions.
What did you need to do to get enough pressure for the duck call to sound?
-
kind of blasphemy for believers in donaldism.
-
You would need to be moving to get a doppler effect, perhaps by playing on a motorcycle.
I had to make the reed wider and longer to work on a lower air pressure, a thinner and less stiff reed helps too.
-
Kimric:
This is what I have used in hobby duck calls:1.658 x .0517 x .010
How much longer/wider/thinner did you have to go? Are they plastic/poly?
Me want!
--Steve