Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Michael Denieffe on March 28, 2024, 08:24:30 PM
-
Hello everyone. I am looking for advice on repairing a leaking Bellows. The cardboard has detached from the wooden frame on the bottom bass side. Also there is a hole in the corner. Can this be repaired. Do I have to remove the wooden frame completely or just glue back the affected side. What kind of glue is required? Do I need to replace the Bellows strip before re glue.
Sorry, no photo as filesize is too big
Many Thanks
-
It's hard to say how to deal with your frame separation without seeing it but you might be able to run a bead of crazy glue or similar around both seams and top them with some weight. I've been doing some inside corner repair lately with really thin pig's skin that i got from the scrap bit at our local shoe repair shop. Sine a flashlight from the inside out to check for more holes. It's works best in a dark room.
-
Thank you Pat for the advice. I take it crazy glue is Super Glue (Gorilla, Loctite etc.). Good idea to examine in darkened room. This bellows is 100 years old so goodness knows what I will find.
-
I'd advise yellow wood glue. Others may disagree.
-
Thanks Rog
-
Crazy (aka super) glue is a very bad choice. I use bookbinding glue, but any white PVA will do. Also: glue doesn't attach well to the shiny side of most types of bellows tape, make sure that there is not more than a mm or so of it between frame and bellows.
-
Good quality bookbinding glue for attaching folds to the wooden frame has worked for me.
-
Thanks to everyone for the good advice