Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Disparate Dan on April 01, 2024, 03:07:01 PM
-
In case it makes any odds, this relates to a Hohner Erica. In the short term I need to re-tape a smallish area of buckle rub, but looking ahead I may as well buy a 25 roll so I have enough to do a full re-tape some day on this or another box. The original seems to be 19mm paper, so can I use that for both repair (i.e. on top of the existing) and for a proper re-tape?
And while I'm at it, what's the deal with calico bellows tape, which seems to be mostly what's available on the continent? I that a piano accordion thing, or what?
-
And while I'm at it, what's the deal with calico bellows tape,
It is what is used on virtually all Italian made boxes, diatonic, piano and cba. It is thicker and much harder wearing than the gold tape used on Hohners. The extra thickness means that after a full bellows retie you will need longer bellows straps.
If you have an Erica with black edging tape a good alternative is bookbinders buckram cloth.
-
To do a 'proper re-tape' you should remove the old tape and replace it. Taping over the old tape will, as a minimum, prevent the bellows straps working as you will have significantly widened the bellows.
This bloke made a helpful video (https://www.youtube.com/watch?v=UhdyuQ9AMsg)
-
To do a 'proper re-tape' you should remove the old tape and replace it.
That indeed is my intention in due course, but for now all I'm bothered about is stopping this area getting any worse. Longest bit of tape needed would be 65mm. Is taping over those 10 folds really not an option?
(https://i.postimg.cc/3wx2BSzX/bellows.jpg) (https://postimg.cc/mPKcZwLk)
(I have seen your most helpful video, btw.)
-
I'm possible anally retentive but, I would strip back the failed part (probably until they were all the same length) then butt a new piece of tape up to the old.
-
I'm possible anally retentive but, I would strip back the failed part (probably until they were all the same length) then butt a new piece of tape up to the old.
That sounds like a plan to me. Thank you. I hope that 24mm is OK as that's what's now on order ...
-
I'm possible anally retentive but, I would strip back the failed part (probably until they were all the same length) then butt a new piece of tape up to the old.
This is also what I would do in this situation.
-
When you remove the old tape a damp sponge is your best friend
The glues used are either water soluble or water softenable