Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Disparate Dan on May 04, 2024, 01:26:03 PM

Title: Newbie question about reeds
Post by: Disparate Dan on May 04, 2024, 01:26:03 PM
I'm nearing completion of the rebuild of an 1898 reed organ which has 261 reeds, so I'm familiar with reeds in general, how they work, and how the tuning is tweaked.  However, I'm puzzled by what I see in this picture of Theo's from his Pariselle advert, which I use with his permission ...
(https://theboxplace.co.uk/wp-content/uploads/2024/05/IMG_6934.jpeg)
The visible reeds are the sort of thing that I'm familiar with.  But what are the cream leather (?) pieces with the slots in them?  What are those circular bits about?

Two enquiring minds here need to know!
Title: Re: Newbie question about reeds
Post by: Lester on May 04, 2024, 01:39:32 PM
The leathers are valves to regulate the air flow to either the pull reed and the push reed. The reed you can see is the push reed and the valve you can see covers the slot for the pull reed mounted on the other side of the plate. There is also a valve for the push reed on the reverse of the reed plate.
That which you refer to as a slot is in fact a metal helper spring to help close the valve.
Title: Re: Newbie question about reeds
Post by: Disparate Dan on May 04, 2024, 02:39:26 PM
Thank you Lester.  Hurrah!  Now it makes sense.

... That which you refer to as a slot is in fact a metal helper spring to help close the valve.

So that circular leather patch covers whatever retains the helper spring?

Is this the standard arrangement, or do Hohner do things differently?

Title: Re: Newbie question about reeds
Post by: Theo on May 04, 2024, 02:44:07 PM
It’s a standard “arrangement” but can differ in details. Valves may be plastic or leather with plastic reinforcement. Plastic valves sometimes have a hole that fits over the rivet head.
SimplePortal 2.3.5 © 2008-2012, SimplePortal