Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Pat McInnis on July 06, 2024, 03:49:18 PM
-
OK all you BC players, time to weigh in. I'm putting together a 3V CC# project at the moment and I'm wondering if there is something close to a standard that would work, given that there seems to be a lot of BC bass layouts available. Or do I just move everything up a step from whatever the particular BC player might be using. This is all under the assumption that this CC# is being used as an Eb box for a BC player not just as an old timey semi-tone.
the current layout is:
CG C#G#
EA GG
Thanks in advance
-
For all the apparent differences, the various BC bass layout all have basically the same notes/chords and bellows directions, it's just the locations and pairings that change. Probably as a result of practical considerations when adapting from older layouts using existing reeds. This could be a factor in your decision too.
The Joe Burke layout is arguably the most practical with push/pull Ds and Gs (in BC tuning) combined on the same buttons, but as my teacher once told me: 'You can get used to anything.' ;D