Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Al Cramer on September 13, 2024, 02:17:43 AM
-
I just aquired a wonderful G/C Bernard Loffet box (it's his entry level model) and want to remove the thirds from a couple of chords. I just wanted to check: since his boxes were basically Italian, it seems all I need to do is open it up and tape off holes with Scotch Magic tape. But are there any gotcha's peculiar to Loffet boxes that I ought to be aware of?
Many thanks!
-
One thing to check is that the same hole is the third for both the push and pull chord. Sometimes it isn't, but I wouldn't know specifically for a Loffet.
-
If it's not, you can still use tape, but on the reed plate rather than the chamber hole.