Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: callmemario on December 04, 2009, 09:41:34 PM
-
Is there no way around the fact that while sitting down playing the box, the bottom of the left strap where it is attached, always seems to rub on a portion of the bottom corner part of the bellows? (and on the long run, that's not right! ;-)
I've had the same experience also with other two row accordions I've owned. Any idea/tricks/suggestions other than the playing posture/position?...
Mario
************************************************************* No replies?... am I the only one that's noticed this? ;-)
-
I can't say I've noticed it - the strap, or more specifically the metal rivet attaching the buckle, rubs on the edge of the box, but not on the bellows. However I play with the instrument tilted away from my body - if you play with it flat against your body then I can see that where the strap runs between your chest and the bellows it might cause wear.
Could you move the bottom bracket so the strap isn't rubbing?
-
Thanks Howard, you might be right: 1) I do keep the box flat against my body and then everytime I extend the bellows, the strap will rub on the bellows. 2) I guess I could try and extend the strap so the only thing that's left to rub is a thinner "strip of the strap!". But if I do this, I have to find a way to make extra holes so that I can keep the same strap lenght I like... I guess it's a question of trials and errors.
I'll keep you posted! ;-)
Thanks for taking the time to write.
Mario
********************************************************I can't say I've noticed it - the strap, or more specifically the metal rivet attaching the buckle, rubs on the edge of the box, but not on the bellows. However I play with the instrument tilted away from my body - if you play with it flat against your body then I can see that where the strap runs between your chest and the bellows it might cause wear.
Could you move the bottom bracket so the strap isn't rubbing?
-
I've tried two different aproaches with some degree of success.
One is to pass the two narrow ends first through a snug-fitting rubber O-ring, then through and around the strap bracket, then back through the O-ring, and then back into the buckle. The O-ring kind of holds the strap loops one within the other, in kind of a tight little bundle and keeps them from splaying apart so near to the strap bracket.
The other is to attach first the right hand strap. Then the left hand strap, rather than going through the bracket, goes through the loop formed by the right strap. This moves the left strap attachment back & up somewhat from its normal position -- in effect, you have only the RH strap wrapping around to the underside of the box.
I also have installed backpads on each instrument to protect the backside. No more bellows dragging across the hardware!
Bob
-
Interesting trick!.
OR have the left strap cut a little shorter and reposition the buckle by a leathercraftsman and give yourself enough slack on the buckle so that only the smaller strip of leather goes underneath the bellows. I'm still experimenting...eventually when I discover the proper lenght that works out for me I'll wrap up the bottom left side of the strap with black felt and sow it in place. (That's what I did with my other accordions). Also modify my playing position like Howard suggested on this previous post. Thanks! :-)
Mario
PS: I'm still surprised that we did not get more postings on this topic!...
**********************************************************
I've tried two different aproaches with some degree of success.
One is to pass the two narrow ends first through a snug-fitting rubber O-ring, then through and around the strap bracket, then back through the O-ring, and then back into the buckle. The O-ring kind of holds the strap loops one within the other, in kind of a tight little bundle and keeps them from splaying apart so near to the strap bracket.
The other is to attach first the right hand strap. Then the left hand strap, rather than going through the bracket, goes through the loop formed by the right strap. This moves the left strap attachment back & up somewhat from its normal position -- in effect, you have only the RH strap wrapping around to the underside of the box.
I also have installed backpads on each instrument to protect the backside. No more bellows dragging across the hardware!
Bob