Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Allan Farrell on October 26, 2024, 06:36:27 PM

Title: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Allan Farrell on October 26, 2024, 06:36:27 PM
I'm looking for some replacement parts (buttons, springs, levers) for a C#/D Kincora built by Martin Connolly. The parts seem to be custom made and are proving difficult to source.

Thanks for any help you can provide.

Allan
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: mselic on October 27, 2024, 02:45:30 PM
Nice to hear from you again, Allan! The best place to source these parts would be through Carini, a wholesale supplier from Italy and THE resource for anyone building or repairing accordions. Why don’t you reach out to Ryan Baker locally for help in that regard? Both he and I order from there regularly. If you bring him your box, he could determine the correct parts and sizes needed.

Matt Selic
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Paul Bryan on October 27, 2024, 04:33:09 PM
hi contact martin quinn he should be able to help you with parts as  the levers were made for kincora and not bought from carini
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Allan Farrell on October 28, 2024, 12:51:36 PM
Hi Paul,

Thanks for your reply. I asked Martin Quinn some years ago about Kincora parts. He seemed to think the parts were sourced from a Slovenian parts supplier but didn'thave any more details. Do you have any more info on where the parts might come from?

Allan
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Paul Bryan on October 28, 2024, 01:44:55 PM
hi alan  martin made some of the parts himself got parts made in ireland also and probably some made in italy as i said talk to martin   quinn again as he may be able to help you source parts for your box
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Theo on October 28, 2024, 01:51:57 PM
Possibly the Slovenian chap mentioned in this thread
https://forum.melodeon.net/index.php?topic=23336.0
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: -Y- on October 28, 2024, 06:28:57 PM
Possibly the Slovenian chap mentioned in this thread
https://forum.melodeon.net/index.php?topic=23336.0

Would it be this shop?
https://nopis.si/shop/en/
A small research with the name in the email in the thread you mentioned lead to this website?
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Theo on October 29, 2024, 08:38:58 AM
It could be that one but the mechanical parts shown there all look like standard Italian parts.
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Graham W on October 29, 2024, 09:12:09 AM
The Slovenian supplier was probably Igor Solinc, of  VzesaHarmonika.

He used to supply bellows and a range of mechanical and other parts via his own website, and I understand that at least some of the mechanical parts were locally manufactured.  The levers were certainly different to those currently listed by Nopsis, with a much more substantial bearing and supplied ready reamed (extremely accurately) to suit the axles supplied.

As far as I understand he makes Rihard branded Steirische diatonics and no longer supplies parts for sale. The Vzesa Harmonika website and shop disappeared a long time ago.
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Theo on October 29, 2024, 09:19:17 AM
Another source might be JohannPascher who is a member here. Hi is Swiss and has been involved in building instruments. 
Title: Re: Replacement Parts - Kincora C#/D by Martin Connolly
Post by: Allan Farrell on October 30, 2024, 01:12:19 PM
Thanks so much for all your helpfull suggestions! I have to  few leads to follow up based on the info you have all shared.

Allan
SimplePortal 2.3.5 © 2008-2012, SimplePortal