Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: callmemario on December 05, 2009, 02:47:13 AM
-
1) Has anyone replaced their bass springs because of their stiffness?
2) If so, WHERE can we get some of these "lighter" springs?
3) Are they difficult to change?
Thank you!.
Mario
-
The Erica has .6mm springs for the bass notes and .7mm springs for the chord buttons. You can re-tension the springs to make them softer by compressing the turn on the coil or buy .5mm springs (which I stock) for the bass and moving the existing bass springs to the chord buttons. Either way the bass mechanism must be removed from the housing to extract the axle rod.
-
Great!. I'll call you. :||:
The Erica has .6mm springs for the bass notes and .7mm springs for the chord buttons. You can re-tension the springs to make them softer by compressing the turn on the coil or buy .5mm springs (which I stock) for the bass and moving the existing bass springs to the chord buttons. Either way the bass mechanism must be removed from the housing to extract the axle rod.
-
Hello,
Where can I buy some of these springs for a Hohner Corona III and how are they set up? Thanks (:)
-
Hi,
You might want to try and ask the expert himself at:
Wilson Music Services
1271 Gorham St, Newmarket,
Ontario, L3Y 1T5
905-853-5082
I believe they represent Hohner in Canada. They are very helpful people. :-)
Mario
-
Mario ,
Thanks for the info.
I will contact them.
-
My pleasure!. Hope it works out for you.
Mario :||:
_________________________________
Mario ,
Thanks for the info.
I will contact them.