Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Brian Cordeiro on November 03, 2024, 11:50:55 AM

Title: Hohner Club X 10 Bass To 12 Bass
Post by: Brian Cordeiro on November 03, 2024, 11:50:55 AM
Hey everyone I hope everyone is doing well. I have a hohner club x and it has 10 on the bass side I would love to convert it to a 12 bass and a 33 treble side diatonic accordion. If anyone can point me in the right direction if this is possible I would greatly appreciate it.(http://)
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: Squeaky Pete on November 03, 2024, 01:56:00 PM
I'm working on a 10 bass to 18 bass at the moment.
I'm using some of the mechanics and reedblocks from a Verdi III piano box.
A lot of the work has been done but I'm at the stage of sorting out the rods. I had planned on using a cut down stradella but in the end it'll probably be rods like a pokerwork.
The holes are drilled and the fondo altered together with recut reedblocks.
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: Dave Praties on November 03, 2024, 05:09:33 PM
Hey everyone I hope everyone is doing well. I have a hohner club x and it has 10 on the bass side I would love to convert it to a 12 bass and a 33 treble side diatonic accordion. If anyone can point me in the right direction if this is possible I would greatly appreciate it.(http://)
Hello Brian,
I am converting an 8 bass Club to 12 bass. I found an old, non stradella,  piano accordion mech and used that. One thing I would suggest, while you are doing the job, is putting in two stops to remove the lower bass note and the thirds. I made a new plywood fondo, and stop mechanism using my laser cutter, but it is a simple project and can be done easily with hand tools.
Dave
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: mChavez on November 03, 2024, 06:58:55 PM
Club X, and the higher-end model 235 are great boxes that are a pleasure to squeeze. I'd just leave as is.

You can get 12 bass * 33 treble Hohner config in their "Morino" series. You also get a double cassotto on the treble side, oversized reeds (in the original, German-built ones) for the lowest bass fundamental & oversized 180-degree reed chambers.
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: Brian Cordeiro on November 04, 2024, 11:08:30 AM
I been trying to look for a morino iii model but I can’t find any
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: mChavez on November 14, 2024, 07:19:39 AM
I don't think there's a diatonic Morino III. Unless you're talking pre-club Morino days, in which case those boxes are extremely rare.

The equivalent is the "original" german-built, Hohner-designed Club Morino from the 50s-early 60s, before the production got outsourced to Italians and the box got redesigned (imho) into a lesser instrument.
Title: Re: Hohner Club X 10 Bass To 12 Bass
Post by: Ben on November 14, 2024, 04:46:27 PM
I am converting an 8 bass Club to 12 bass. I found an old, non stradella,  piano accordion mech and used that. One thing I would suggest, while you are doing the job, is putting in two stops to remove the lower bass note and the thirds. I made a new plywood fondo, and stop mechanism using my laser cutter, but it is a simple project and can be done easily with hand tools.
Dave

Looks great Dave! How are you sealing the slides crossing over the air hole?  And a great idea using an old 12-bass PA.  I assume the bass end will still be bisonoric?
SimplePortal 2.3.5 © 2008-2012, SimplePortal