Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Disparate Dan on December 31, 2024, 02:25:04 PM
-
I know it's me just not having much of a brain at the moment (manflu ::)) but as I'm curious to know just how far out some of the notes are on my Ebay Special C/F Hohner, I've pushed the boat out and invested in the Aireyware tuner.
I've got it set to "Accordion" but which of the octave settings do I use?
-
I don't use any of these settings, it doesn't really change how the tuner behaves. It's mainly to know which string/button is used. Which you can read on the bottom of the screen anyway. I've set it to violin as it taes less space on the screen.
-
Thank you (:)
-
Um…you may find it will show the notes sharp, because it will 'hear' all the treble voices at once, if your instrument has a nice warbling tremolo and you haven't isolated the 'concert' reed with a coupler button or stop (if it has one, which it may not). Most tuners are designed to measure a single note. Accordions are a bit unusual because they use multiple reeds to make a sound, and a tuner won't give you an accurate reading, unless you isolate the reeds to hear them singly.
-
Um…you may find it will show the notes sharp, because it will 'hear' all the treble voices at once, if your instrument has a nice warbling tremolo and you haven't isolated the 'concert' reed with a coupler button or stop (if it has one, which it may not). Most tuners are designed to measure a single note. Accordions are a bit unusual because they use multiple reeds to make a sound, and a tuner won't give you an accurate reading, unless you isolate the reeds to hear them singly.
Cheers Rog. I was wondering about that ...
-
Um…you may find it will show the notes sharp, because it will 'hear' all the treble voices at once, if your instrument has a nice warbling tremolo and you haven't isolated the 'concert' reed with a coupler button or stop (if it has one, which it may not). Most tuners are designed to measure a single note. Accordions are a bit unusual because they use multiple reeds to make a sound, and a tuner won't give you an accurate reading, unless you isolate the reeds to hear them singly.
This is why I like Bill Farmer's tuner app.
-
One good thing with Airyware Tuner app is that it allows you to save the tremolo curves you want. Quite useful to make a first pass on the M+ (or M-) voice with a given curve, and then correct by ear.
It calls it "stretching", you supply a list of offsets in cents and a starting note (e.g. B2), and then you tune your reeds as you'd do with the M voice.
-
I have Bill Farmer's Tune on my laptop but is there a way to download it to iPhone?
I can't find it on his website.
-
I have Bill Farmer's Tune on my laptop but is there a way to download it to iPhone?
I can't find it on his website.
No iPhone version, only available for the vastly superior Android platform
-
Poo!
-
No iPhone version, only available for the vastly superior Android platform
Opinions may vary ;D
I compiled it on my Linux laptop but there is some weird shenanigans with the sound, so lost the will to live before I could get it to work…and anyway I've got Dirk's so it was more for curiosity than anything else.
-
I have an airywave. 2nd to 4th should do the trick