Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Steve Mallas on April 09, 2025, 10:26:48 PM

Title: Homemade metal bellows corners
Post by: Steve Mallas on April 09, 2025, 10:26:48 PM
Does anyone have any info on metal bellows corners? I’ve searched through the forum and there’s loads of threads about metal corners but I can’t find the info I’m actually looking for.
What material are they made of? I’ve read brass, stainless steel and aluminium but what about something shiny like cupro nickel? Or is there anything better? What thickness is the metal? Finally what dimension is the inside gap? I know I can buy them but I want to make them and rather than pull one off my perfectly complete melodeon to measure it, I reckon someone in here would know.
Title: Re: Homemade metal bellows corners
Post by: Theo on April 09, 2025, 10:43:42 PM
In my repair work I’ve seen metal corners made of steel, brass, nickel and stainless steel.  Brass can be plain, nickel plated or even gold plated. Thickness of material typically between 0.28 and 0.35mm.  There are also many different shapes and sizes.
They are cheap to buy so I’ve not felt inclined to try making them, but some simple, well designed, press tools should do the job.
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 09, 2025, 11:40:10 PM
Ideal thanks for your reply 😊
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 10, 2025, 06:22:41 AM
What would you say a typical inside gap dimension would be?
Title: Re: Homemade metal bellows corners
Post by: Fanie on April 10, 2025, 07:06:57 AM
A while ago somebody posted pictures and a video of the gadget he made to make bellow corners from empty canned fruit cans. I tried it and it worked perfectly.
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 10, 2025, 07:38:32 AM
Thanks that sounds interesting I’ll have search for that
Title: Re: Homemade metal bellows corners
Post by: Fanie on April 10, 2025, 07:42:34 AM
Here it is:

https://forum.melodeon.net/index.php?topic=28310.msg339283#msg339283
https://www.youtube.com/watch?v=84_6s5SFOH8
Title: Re: Homemade metal bellows corners
Post by: Theo on April 10, 2025, 08:20:33 AM
What would you say a typical inside gap dimension would be?

I side gap just needs to be big enough to slip over the bellows fold before being crimped in place.
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 10, 2025, 10:51:41 PM
Thanks again. It’s so I can make a bending tool. I need an idea of what that measurement would be in order to make the tool, but actually if I measure the total outside width of a metal corner whilst it’s fitted to my melodeon then I can subtract the thickness of the metal x2 (which you kindly shared with me) then what were left with is the inside gap😊
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 10, 2025, 10:54:13 PM
Thanks for the link Fanie I’m going to watch that now 👍
Title: Re: Homemade metal bellows corners
Post by: tirpous on April 10, 2025, 11:44:57 PM
Quote
Thanks again. It’s so I can make a bending tool. I need an idea of what that measurement would be in order to make the tool, but actually if I measure the total outside width of a metal corner whilst it’s fitted to my melodeon then I can subtract the thickness of the metal x2 (which you kindly shared with me) then what were left with is the inside gap😊

FWIW, I have a bag of commercially-available corners here and the total outside width is around 4.5mm. This is rather more than the typical installed width which varies but rarely exceeds 4mm (the first 2 bellows I measured were around 3.5).
Title: Re: Homemade metal bellows corners
Post by: Steve Mallas on April 11, 2025, 06:47:41 AM
Thanks for that. That’s what I’ll start with
Title: Re: Homemade metal bellows corners
Post by: mChavez on April 11, 2025, 07:38:28 AM
Here's a few photos of a corner bending jig by Sergei Akimov. Made from a piece of alloy flat bar and a cut-up file.
Use google translate.

https://poigarmonika.ru/garmon-tehnicheskie-aspekty/prisposoblenie-dlya-formirovaniya-mehovyh-ugolkov.html


You're better off buying them and you should be able to find them in just about in any material and size. Check out book making supplies, etc. Very hard to justify the time & effort required to make your own, imho.
SimplePortal 2.3.5 © 2008-2012, SimplePortal