Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Helena Handcart on April 13, 2025, 11:58:33 AM

Title: Keyboard screws for Hohner Pokerwork/Erica model
Post by: Helena Handcart on April 13, 2025, 11:58:33 AM
I've just opened up an old junker of a pokerwork I picked up a few months back. It had a wonky keyboard and I've just found out why. I've opened it up to find that only one screw holding the keyboard in, it is mangled and doesn't look to be the correct size. The other side of the keyboard appears to have been cleverly fixed in place with wax  :o

Can anyone tell me the correct size and type of screws for a Hohner keyboard fixing please?

Thanks

Edit: yes I know I can measure screws, but neither my eyes nor my tape measure are confident in differentiating between 2.5mm and 3mm diameter.

Title: Re: Keyboard screws for Hohner Pokerwork/Erica model
Post by: Squeaky Pete on April 13, 2025, 02:51:45 PM
I'll find you some.
I have plenty.
Title: Re: Keyboard screws for Hohner Pokerwork/Erica model
Post by: Theo on April 13, 2025, 08:30:48 PM
If it’s a plastic keyboard they are usually M3 but not easy to find the correct length.  If Pete can’t find you some I have them.  If it’s a wooden keyboard they are long wood screws.
Title: Re: Keyboard screws for Hohner Pokerwork/Erica model
Post by: Helena Handcart on April 14, 2025, 11:20:15 AM
Thanks to Pete and Theo, Pete has confirmed the correct ones are M3 x 40mm and I have some ordered.
SimplePortal 2.3.5 © 2008-2012, SimplePortal