Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: fallonje on December 19, 2009, 01:10:14 PM

Title: Hohner 2 Stop One Row
Post by: fallonje on December 19, 2009, 01:10:14 PM
Are 2 stop one row Hohners LMM or LMH? I'm thinking about one in the key of G. Thanks
Joe
Title: Re: Hohner 2 Stop One Row
Post by: Andy in Vermont on December 19, 2009, 03:39:04 PM
Are 2 stop one row Hohners LMM or LMH? I'm thinking about one in the key of G. Thanks
Joe

Joe,
Those are 3 voice configurations.  Usually the 2-stop is MM unless someone has changed it.
Title: Re: Hohner 2 Stop One Row
Post by: fallonje on December 19, 2009, 04:14:40 PM
Sorry, I'm not as smart as I look.  :|bl  What about the 3 stop boxes? Thanks
Title: Re: Hohner 2 Stop One Row
Post by: Rob2Hook on December 19, 2009, 04:20:16 PM
One of my friends has a 3-stop, which is LMM.

Rob.
Title: Re: Hohner 2 Stop One Row
Post by: melodeon on December 19, 2009, 05:08:07 PM
I own a 50's HA112   or 2 stop Pokerwork in "A",,,   it is two reeds  MM

I have owned an HA113  or 3 stop Pokerwork which I sold to Paul Groff... it was an LMM  in "D"
Title: Re: Hohner 2 Stop One Row
Post by: Theo on December 19, 2009, 11:46:20 PM
I've seen a couple of 3 stoppers, all were LMM
Title: Re: Hohner 2 Stop One Row
Post by: fallonje on December 19, 2009, 11:54:39 PM
Thanks everyone.
Title: Re: Hohner 2 Stop One Row
Post by: Theo on December 20, 2009, 12:00:10 AM
The two and 3 stoppers seem to come in a wider variety of keys, I've seen A and Bb for example.
Title: Re: Hohner 2 Stop One Row
Post by: old geezer on December 20, 2009, 02:56:30 AM
The two and 3 stoppers seem to come in a wider variety of keys, I've seen A and Bb for example.

the 2 stop or HA112 normally have a 12 fold bellows,
the 3 stop or HA113 come with a 14 fold bellows, I've seen them in the key of A or D or G and are LMM
whilst the 4 stop or HA114 come with a 17 fold bellows, are LMMH, and seen them in the key of C or D or G.

the Hohners with silver paper ends were made in the 1950's & 60's
and the gold paper ends were made during the 70's & 80's

these are normally fitted with aluminum plate reeds, though zinc plates can often be seen inter-mixed with the Al's
the normal easy fix for loose stop-slides are rubber bands. I've inserted steel balls under springs recently in a 4 stop reed block, and drill indent holes in the Al' slides, to hold each slide open. (I pulled a padlock apart, and used a similar system. the lock doesn't work now, 'cos I've used the springs in this melodeon).
Title: Re: Hohner 2 Stop One Row
Post by: melodeon on December 20, 2009, 03:52:22 AM
Removing the stops, rod and all...
drill out the rod holes to 1/4 inch
Fit 1/4 inch maple dowels...cut flush
Drill hole for an "interference" fit with the rods... paint with ink or felt pen
"Dry" fit the rods and run them in and out until snuggish..
Reassemble

No rubber bands...

Another trick is viloin bow rosin on the rods...  or   "peg dope"
Title: Re: Hohner 2 Stop One Row
Post by: Malcolm Clapp on December 20, 2009, 05:03:41 AM

No rubber bands...


A shameful suggestion!   :o

The world's entire rubber band industry could be ruined if meldeon players adopt your fix.   ;D

Not to mention the makers of wooden clothes-pegs, the other old stand-by.    >:E
SimplePortal 2.3.5 © 2008-2012, SimplePortal