Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Thales von Dasos on March 18, 2026, 07:49:35 PM
-
Hello there!
I've recently acquired a Hohner Morino Club. It seems to be the earlier version (not S or N) with round register buttons, a bellows lock and crucially, no bellow pins. I would really like to take a look inside this beautiful box, but I'm unable to open it. Now, thanks to accordionrevival.com, I already know that such a pinless construction has two levers under the grille that release the treble side. I've located and rotated these, but still it won't open, and I don't want to yank at the bellows because I'm afraid of damaging the melodeon.
Does anyone have experience with these pinless bellows and maybe a disassembly video or ideas what I'm doing wrong?
Or maybe someone knows the correct name for this type of construction? Searching for "pinless bellows" was not fruitful.
-
Typical Hohner Morino pinless mechanism.
You take the grille off, and then turn the bent metal rods at the top (front end) of the fondo. The bottom is hinged, so when you remove the casing, pull the "front" first - it should just separate with gentle pressure, but it might have glued itself to the gasket, so might need some persuasion.
You do want to put the mechanical bellows lock (as opposed to the two mechanical "pin" latches) into "open" position too, otherwise the casing won't come off - if I remember correctly, the lock fixes the treble casing to the bass reed block, so there's potential for some extensive damage if you try to yank it open while the bellows lock is activated!
German-era Morino Club is an exceptional box - very few come close to it, if you ask me, and the later S&N Italian jobs, while decent boxes in their own right, fall very short of the original German design. Well worth some TLC to get it in top condition.
-
The Hohner Atlantic and one or two similar models come apart as described above. If the treble end refuses to budge (which it often does if it hasn’t been opened for a while) i use a blunt knife blade to gently unstick it. Work from the front near the swing latches. The end pivots along the back of the bellows, though there isn't actually a hinge. Getting them back on can be fun. FYI on the Atlantic the bass end comes off after unscrewing the feet.
-
The end pivots along the back of the bellows, though there isn't actually a hinge.
Yep, this is a much more accurate description of what I meant :-[