Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Marien Lina on April 08, 2026, 09:20:05 PM
-
Lately I picked up this project of an old Hohner, dimensions are the same as a pokerwork. I liked the colours of it, it has an orange/goldy glittering appearance, so I think I am going to refurbish it. I guess the glittering orange is an early Hohner experiment with kind of plastic. I am guessing this one may date from the thirties, or even the twenties?? It appears to be in AD tuning, and the body needs a lot of work, as it is warped a bit...
As for the bass buttons: you can see it on the photo, the bass buttons on the outer row are placed higher than the ones on the inner row, whereas a pokerwork has both bass rows the same height. So I am thinking about filling the holes of the outer bass row and drilling new holes on the same height as the inner row. So I am asking advice about this, should it be corrected or would you leave the button positions as is?
Thanks for any comment,
Marien
-
The metal action was introduced in 1929/30 so I would estimate that is from the early 1930s. Hohner were prolific in producing new finishes at that time, both celluloid and painted.
-
A better idea would be to make a new wooden plinth for the inboard buttons then you can put it whare you want. Make it slightly oversized then if there's a shadow line created by the original piece you can fit it symmetrically and still cover the original telltale edge.
Depends on how original you want it to look.
-
I have a similar age, model 3515, pokerwork size 8bass 2 row, that has the offset bass. From what I’ve seen they offered both in those days and the offsets aren’t terribly unusual. I don’t have any trouble adjusting to playing it, i perhaps tilt the box slightly differently, but it feels comfortable very quickly.
Gren
-
I would tend to take the lazy approach: leave the buttons as they are for now and see how it works for you. If it -really, really- bothers you after a while, then yes, reposition them. I mean, the buttons have been that way for almost a century and no one felt a need to 'correct' their position, so no rush.
Just my 2 cents.
-
What Tirpous says.
-
Thanks all for the comments, I think my favorit approach is the lazy one... Changing button positions also would ask for changing some metal strips between the button and the action board.
Thanks again...