Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: cnetter on June 06, 2026, 01:52:53 AM
-
hello,
I have an old pre-pokerwork Hohner GC melodeon that I got for almost free and it needs some work. The bass buttons are in terrible shape and some are missing. Is there a source for these in the USA? I've contemplated 3D printing some if I can't find a source. https://photos.app.goo.gl/YUHLVTLG7KRjbNVE7 (https://photos.app.goo.gl/YUHLVTLG7KRjbNVE7)
-
Not in the US, but just north of border in Canada. Wilson Music Services has them: https://wilsonmusic.ca/product/bass-button-hohner-2815/ (https://wilsonmusic.ca/product/bass-button-hohner-2815/)
-
These were made of casein and have a tendency to break down over time.
I have made vintage looking buttons using discs cut from old accordion keys and using a old celluloid bass button as the post.
After gluing the disc to the prepared button I would turn them on my little Unimat lathe. The would match the instrument better than the bright white ones from Hohner.