Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: Ross Dubois on June 25, 2026, 07:55:45 PM

Title: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: Ross Dubois on June 25, 2026, 07:55:45 PM
Hey folks,

Just took receipt of a beat up hohner 4 stop with the '1915 san Fransisco' award labeling on the box. I meant to harvest it for reeds because they're steel and 4 registers. I was rather surprised though when it turned out to be a A box and the voices are MMHH. Or, at least I think. The A pitches on the reeds are A3 and A4.

So some questions;

-Is that an MMHH due to the already lower pitching of A and not LLMM? I feel like if it was a lower designation it would be way deeper on a box of this pitch but to be fair I am not well versed in the octave configuration of registers.

-when I immediately opened this box I thought I saw the typical O stamp, but actually they are small hexagons. I haven't seen that stamp yet. Anyone know what that's about? The reeds have a different profile than hohner H reeds or earlier T reeds, they're a bit more tapered and less 'parallel'

-was it a common thing to make a MMHH box at the time? I have a strange hohner 1 row that's set up MH, but most other boxes I've played from the era were LMH or LMM. I'd be curious to hear what you think of this whole thing.

Thanks!
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: Theo on June 25, 2026, 09:10:21 PM
Hi Ross, I don’t have a direct answer to you questions,  but I have seen a variety of different markings on reeds from the early years of the 20th century.  I’ve not seen a hexagon, but I have seen square, triangle, chamois head and swastica.

Regarding voicing I have a Hohner here which I’m sure has its original reeds and seems to be pre 1930 when the metal action came in .  These are marked H, and the box is C#D four voice  MMMH.  I don’t see any evidence that there was a standardisation of voicings at that time, rather it seems there was a lot of experimentation.
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: tirpous on June 26, 2026, 03:00:27 PM
I think it was more or less 'normal' for older 4-voice 1-rows to be LMMH when in keys of C or D, but rather in MMHH when in G or A. If you search the forum for MMHH you will see threads with more info and box pictures.

For 3-voice 1-rows, I've also seen some in MMH.
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: Ross Dubois on July 03, 2026, 07:41:48 PM
I just took receipt of a similarly aged 4 voice in Bb. Same thing, all in MMHH. This time with O stamped reed plates as opposed to the hexagons.

Theo, that 4 voice C#/D sounds mighty interesting. Is it at the playing condition stage of restoration? I'm very curious as to how it sounds blasting all 4 H reed voices
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: Theo on July 04, 2026, 06:50:24 PM
Yes the 4v C#D is now restored to good playing order. I still don’t have a grill but that is all that remains to do.
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: John Lutz on August 05, 2026, 06:36:55 PM
Just took receipt of a beat up hohner 4 stop with the '1915 san Fransisco' award labeling on the box. I meant to harvest it for reeds because they're steel and 4 registers. I was rather surprised though when it turned out to be a A box and the voices are MMHH. Or, at least I think. The A pitches on the reeds are A3 and A4.

I am in a very similar situation, but the 'Grand Prix Philadelphia 1926' version. Everything else is the same: the key is A, the voices are MMHH, the pitches at A3 and A4.

The box is very wet and horribly out of tune, so my first question is: are these generally tuned to make two pairs of MH voices? In other words, if I want it to be slightly wet, would I tune the bottom two H and M voices (for example) dry relative to each other, and the same for the top two, then create the wetness offset between the two pairs?

Hopefully my question makes some kind of sense...

Thanks!
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: Jesse Smith on August 06, 2026, 07:57:14 PM
The box is very wet and horribly out of tune, so my first question is: are these generally tuned to make two pairs of MH voices? In other words, if I want it to be slightly wet, would I tune the bottom two H and M voices (for example) dry relative to each other, and the same for the top two, then create the wetness offset between the two pairs?

I would assume they were tuned M / M+ / H / H+, so that you have your choice of with or without tremolo separately for the M and H pitches. So if you wanted "slightly wet", you would tune the M pair to your desired tremolo and then tune the H pair to a corresponding degree of tremolo. (In practice, I believe the higher pitches get tuned farther apart for obscure psychoacoustic reasons.)
Title: Re: Question about pitch and reeds in a pre war Hohner 4 stop
Post by: John Lutz on August 08, 2026, 02:45:23 PM
I would assume they were tuned M / M+ / H / H+, so that you have your choice of with or without tremolo separately for the M and H pitches. So if you wanted "slightly wet", you would tune the M pair to your desired tremolo and then tune the H pair to a corresponding degree of tremolo. (In practice, I believe the higher pitches get tuned farther apart for obscure psychoacoustic reasons.)

Right, this was what I was trying to express, I think. It seems like the common-sense approach. I will mine the forum for tips about the tuning of M vs H reeds for the tremolo - I'm still pretty new to this forum, and it's simply amazing, the depth of information that's available here!

Thanks - JohnL
SimplePortal 2.3.5 © 2008-2012, SimplePortal