Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: michik on January 02, 2010, 12:24:32 AM
-
I'm suffering from MAD for some months now, and I have aquired some more or less alive melodeons.
Actually I do not like non-working instruments, so I have started to refurbish them. :|||:
The first one is a D/G melodeon, made in Vienna in the 1920s by Karl Schwirsch, one of more than 50 accordeon manufacturers at this time in Vienna.
(http://img22.myimg.de/schwirsch36ddc2_thumb.jpg) (http://www.myimg.de/?img=schwirsch36ddc2.jpg)
(http://img22.myimg.de/schwirsch101165_thumb.jpg) (http://www.myimg.de/?img=schwirsch101165.jpg)
(http://img22.myimg.de/schwirsch22b44a_thumb.jpg) (http://www.myimg.de/?img=schwirsch22b44a.jpg)
I have cleaned the reed plates and reeds and revalved them with modern plastic valves
(http://img22.myimg.de/schwirsch19716a_thumb.jpg) (http://www.myimg.de/?img=schwirsch19716a.jpg)
Next step: reattaching the reed plates to the reed blocks
Question: How do I use the reed waxing spoon ? Actually I do not have any idea how to do that (I have one like "Reed Wax Spoon #404" on http://www.hmtrad.com/catalog/winds/sbx/sbx-part.html )
or should I go for a different method ?
The bellow requires some major efforts:
(http://img22.myimg.de/schwirsch2d5aac_thumb.jpg) (http://www.myimg.de/?img=schwirsch2d5aac.jpg)
The bellow is tight. I plan to replace the caliko strips only, and I also want to enforce the ends with cardboard
Question: How to remove the old glue (hide glue) ? It is very hard when dry, and gets very sticky when wet - or should I leave it on ?
-
Work in progress ...
Reeds revalved and waxed onto the reed blocks and bellow gets new tapes
(http://img7.myimg.de/reeds5b3b8_thumb.jpg) (http://www.myimg.de/?img=reeds5b3b8.jpg)
The bass mechanism ... quite simple ... made of wire and wood only (original condition)
(http://img7.myimg.de/bass335ee_thumb.jpg) (http://www.myimg.de/?img=bass335ee.jpg)
-
I'm going to enjoy this thread! ;D