Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Lew Morris on July 16, 2026, 08:02:59 PM
-
I'd like to buy this little A/D, but I'm unfamiliar with the "Verdi" marque, and google can only locate Hohner PAs with the name.
It has many characteristics of Hohner boxes; even down to the grill pattern. But it appears to have two less folds on the bellows, and no pins to hold it together.
Can anyone identify this instrument for me?
-
It’s a Hohner. They used the Verdi name on many different instruments over a few decades. It’s a fairly typical early 30s Hohner two row, of the type with broad bellows frames.
-
Thanks Theo. I think this may be as close to a D/G as I'm going to find over.
At least in my price range... ::)
-
I hate not being able to play an instrument before buying it, but over here, they are few and far between; California to Denver about 1,200 miles away.
Can you hazard a guess as to how the tremolo might compare to later Pokerwork boxes.
Yeah, I know, hard tellin' not knowin'.
My 1-row 114 is in C, my 2-row 2815 is in G/C. This A/D would give me the "D" that I've been looking for. If this even make any sense...
-
My 1-row 114 is in C, my 2-row 2815 is in G/C. This A/D would give me the "D" that I've been looking for. If this even make any sense...
It makes great sense. I often go out with G/C and A/D boxes. I love those low pitches.
-
....no pins to hold it together.
Don't be put off because of this; the release bolts are under the treble grill and bass cover, and screw into threaded plates mounted inside the bellows frames.
The possible downside of this model is that, with an instrument of this age, it is likely that it is tuned to A435 rather than modern (?) A440, so a bit of reed work may be needed if you intend to play along with other players. The upside of this is that the amount of tremolo can be set to your particular requirements at the same time....
-
Yes I would say it’s almost certain that it will need a reed overhaul: Reeds out, clean off old wax, replace all valves, mount Reed’s with new wax and tune.
-
Yes I would say it’s almost certain that it will need a reed overhaul:
Again, thanks for the insight.
it is likely that it is tuned to A435 rather than modern (?) A440
If this is representative, I think I like 432-435 better. Cut to 1:22
https://youtu.be/dpV1ufAu8fQ?si=HzYr5q8nsRkw9qOM
I don't play this others, there are no others in my part of California, not Irish/English anyway.
-
The possible downside of this model is that, with an instrument of this age ...
Can anyone tell me if this instrument is likely to have zinc reed blocks?
-
Yes very likely zinc reed plates on wood reed blocks.
-
on wood reed blocks.
Check.
This might damp my purchase-enthusiasm a bit; I can't play it, so have no idea about its condition.
I know zinc 'corrodes' (zinc pest) over time and that that might affect the reed clearances.
-
Given the age of it I would work on the assumption that it will need a full overhaul to make it playable.
-
What sort of money is being asked for it? It looks lovely, and unusual too. As for your "zinc pest"; I've never come across zinc reedplates which have shown any problematic sign of this, and I've worked on some really old rubbishy things in my time!
-
I believe that zinc rot or Mazak rot is more prevalent in zinc alloys rather than pure zinc, particularly the magnesium zinc alloys (Mazak), and then mainly if there are impurities in it. Are zinc reed plates pure zinc, or an zinc alloy?
-
As an aside, Scott Bellinger has a 21 - 12 bass Hohner, in good condition (Scott wouldn't sell it if it was rubbish), which he will tune to my liking; $800USD + tax ($64) & shipping ($140) = 1,004USD [748GBP]
But the older key action, and 12 bass keys are somewhat daunting to me at this stage of my playing level..
What sort of money is being asked for it? It looks lovely, and unusual too.
$225USD [168GBP]
Buy the Verdi... $225
getting it from Colorado to Califorina (900 miles); $100
shipping it from California back to Georgia, for rework; $130
rework; $400-600
return shipping; $140
Total: $1,195 [893GBP].
What say you?
-
Lew-
Another candidate, closer to the Verdi (but nicer:) that already has extensive restoration is this Hohner in AD. It is Pokerwork size and shape and most parts are interchangeable with them. I really like these 'black and blond' boxes and have several in my personal 'fleet' that are not for sale.
Here is the listing:
https://bellingersbuttonboxes.com/product-detail.php?prod_id=220 (https://bellingersbuttonboxes.com/product-detail.php?prod_id=220)
Here is a very similar AD black and blond I restored a while ago:
https://www.youtube.com/watch?v=JGDGOiixtm8 (https://www.youtube.com/watch?v=JGDGOiixtm8)
ps- Shipping fully insured should be more like $45-$60
Scott
-
Question: are you looking specifically for an older Hohner(ish) 2-row in A/D, or any A/D would do no matter the age and brand ? Or any old Hohner, no matter the key ?? Or any 2-row no matter the age, brand and key ???
-
Question:
are you looking specifically for an older Hohner(ish) 2-row in A/D,
or any A/D would do no matter the age and brand ?
Or any old Hohner, no matter the key ??
Or any 2-row no matter the age, brand and key
That's four questions... 8)
Answer: a 2-row, A/D, in North America, preferably below the 49th parallel, and within my discretionary budget (less than two mortgage payments).