Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Clive Thorne on July 18, 2026, 05:05:31 PM
-
As per the title really. Would re melting old wax in situ rejuvenate it at all, or is the chemical composition permanently changed by time?
Also I guess, is modern wax any different to the wax that was used "back in the day"?
-
Simple answer is no, but as a temporary measure if a reed plate is loose because the wax is failing you could get it working again by melting the wax. Wax varies greatly in composition, but it does change over time. Oils oxidise and harden, and volatile components evaporate.
-
If you scrape old wax, it is very powdery.(& messy)
If you then re-melt it, and scrape it again, it is still powdery. Nothing for it but new wax. ☹
Good luck.👍👍👍👍👍
-
Thanks for the replies. A follow on question: I bought a block of Hohner wax (from Hohner in the Coldharbour Lane days), about 45 years ago. Given the answers given above, should I be binning it and buying some new stuff?
-
Getting rid of old wax is really messy. If you're going to that much trouble, I would defo get new wax.
Pop off the old reeds & clean them,replace valves,etc.
Last time I did this, I took the reed blocks outside to get
the old wax off. Good luck. 👍👍👍👍
-
Thanks for the replies. A follow on question: I bought a block of Hohner wax (from Hohner in the Coldharbour Lane days), about 45 years ago. Given the answers given above, should I be binning it and buying some new stuff?
If it will still melt and flow it is fine. If not toss it.
-
I generally find most reedwax is only satisfactorily 're-meltable' for a short time once it's on the blocks holding reeds in place. It begins to dry out and change fairly quickly and doesn't melt and flow as nicely or as cleanly even when it's still viable and doing it's job holding the reeds in place. I've had plenty of new, Italian-made instruments in my shop that have required some work and I found the wax was no longer 'like new'. I've been surprised how quickly it changes. On my own instruments, regardless how long it's been, if I have to take a reed out for some reason I always reinstall with new wax.