Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: rileycat on October 19, 2026, 09:37:41 AM
-
I have bought a good quality box which hasn't been played for a long time. The accidentals and a couple of other 'dusty end' buttons 'clack' in the manner of pallets which have become hardened on their faces (I think, if my Hohner experience is transferable).
Is there a simple remedy not involving re-facing, such as a rub with a toothbrush or similar just to raise the 'pile' again? I'm pretty sure that it is lack of use that is the cause, the pallet has remained compressed for too long. It's a slight hope, I know, but rather than having to go the whole hog on a re-face for just a couple or so buttons.....
-
Yes you can brush the pallet face to raise the nap. I’ve done this and it does improve things.
Before starting this check that there isn’t something else causing the noise. Sometimes levers can hit the underside if the grill - play ing with the grill off will tell you if it’s this.
You can also get noise if the action has a double lever. The link between the levers can be slack and will then rattle.
-
Although getting a brush between the pallet and fondo is nigh on impossible, unless the brush is very very small.
-
I’ve usually done this when I have the keyboard stripped down. Otherwise the pallets would have to detached from the levers. I’d never considered trying to brush the pallet facings in situ.
-
Many thanks for both bits of advice. I am able to strip down a keyboard, but maybe it won't be necessary - fingers crossed. Re-facing, tho', is definitely outside my skill set!
-
I've been able to do this (raise nap without dismantling) by using one of those small dental interstitial brushes.
-
I've been able to do this (raise nap without dismantling) by using one of those small dental interstitial brushes.
If you need a longer reach, it's possible to buy straw-cleaning brushes in diameters down to 2mm.
I use them for cleaning whistle heads (and if the bristles are slightly too wide it's easy to cut a smidgeon off with scissors). Thought I'd mention them because they're useful for fiddly jobs, but for a long time I'd no idea they existed.
This is one listing, there are probably others:
https://www.ebay.co.uk/itm/358285035863?
-
Thanks all. I might have to try both the above, as someone has rounded off the heads of 2 of the 4 screws used to attach the keyboard. That was a bit annoying, not insurmountable of course, but grrrr!