Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: chrisstevens on February 04, 2010, 08:34:08 PM
-
Just acquired a Hohner 114 - I'm getting a little leakage and clacking from the pallets, so I'm going to resurface them. Few quick questions:
What material do you use for the pallet leather and felt?
Whats the best way to remove the old material?
Can I pull all the pallets out at once by unscrewing from the soundboard and avoid removing them from the fulcrum?
Thanks for your help!
-
I was looking forward to some answers on this. What I plan to do is buy the combined felt/leather material from CGM Musical, now on Ebay **HERE** (http://cgi.ebay.co.uk/PALLET-FACING-LEATHER-FELT-Melodeon-Hohner-Type-2-5mm_W0QQitemZ130363752611QQcmdZViewItemQQptZUK_MusicalInstr_Keyboard_RL?hash=item1e5a4900a3)
On my box the pallets are held on to the levers with wax (I think), so should be removable by warming the metal with a soldering iron. Handling the pallets separately will I think make it easier to prepare them, and then I can just glue them all onto the sheet of felt before cutting them off individually.
-
What material do you use for the pallet leather and felt?
I bought mine ready made from Theo
Whats the best way to remove the old material?
Just peel it off then scrape/sand the old glue off
Can I pull all the pallets out at once by unscrewing from the soundboard and avoid removing them from the fulcrum?
I wouldn't unless I was forced to, the pallets are far easier to handle off the levers and you can glue them to the new facing all in one go and when you cut them apart they are already trimmed. Clean out the slot, pop them back into place and add a blob of hot melt glue to secure.
Pete (:)
-
*bump*
I was just thinking,is it possible just to sand the leather until the surface is flat again? i think its thick enough.
-
*bump*
I was just thinking,is it possible just to sand the leather until the surface is flat again? i think its thick enough.
The best bet is probably to peel off what you can first.
Then lay a piece of 60 grit sandpaper on a flat surface and rub them across this until the surface is completely clean.
Also you might have to raise the button height slightly if the new pallet facing material is thicker than the original.
This is the material you need http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html#3
One piece should be enough for a one row box.
Martyn
www.melodeonrepairs.co.uk
-
yeah,it worked on the first but already on the second the leather broke,so now i have to do a war repair cause im gonna play this box tonight! hmm i wish i have some leather i can use
-
Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather? ???
I've been pondering this for days and then realised that the sensible thing to do is ask!! ::)
-
Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather? ???
I've been pondering this for days and then realised that the sensible thing to do is ask!! ::)
Glue the pallet to the felt side.
Martyn
www.melodeonrepairs.co.uk
-
Help! I'm about to resurface the pallets on an old three voice 1 row box and I've bought facing material from CGM - which side do I glue to the wooden pallet... felt or leather? ???
I've been pondering this for days and then realised that the sensible thing to do is ask!! ::)
Glue the pallet to the felt side.
Martyn
www.melodeonrepairs.co.uk
Thanks Martyn - I kind of thought that the leather should be the working surface ... but I had one of those nagging little doubts! Your reassurance is much appreciated! ;)
-
CGM:s pre-made felt/leather seems great,too bad not living in UK.
I hade some leather wich saves the night,have to make a proper reparation later.
-
CGM:s pre-made felt/leather seems great,too bad not living in UK.
Charlie will post worldwide; I had a delivery from him to Cyprus and it only took a day longer than internal UK post.
-
Some possibly useful photos (https://picasaweb.google.com/lester.bailey/Melodeon1140Refurbishment#)
-
CGM is good to North America. Also, not having the pallet totally clean before you glue the felt to the wood CAN cause you trouble but it can work without sanding the pallet and might be worth a try. I didn't sand and only had to do a corrective clean on two pallets.
-
After resurfacing the pallets in june with some leather i had at home it worked well but i discovered the chord pallets were still leaking,so yesterday i took them ou and applied felt/leather,i guess its the sam as CGM sales,iv got mine from a swedish supplier.
Anyway,its not better, i think the whole action has to be adjusted,so how to do that whiout wrecking the whole bass end?
-
After resurfacing the pallets in june with some leather i had at home it worked well but i discovered the chord pallets were still leaking,so yesterday i took them ou and applied felt/leather,i guess its the sam as CGM sales,iv got mine from a swedish supplier.
Anyway,its not better, i think the whole action has to be adjusted,so how to do that whiout wrecking the whole bass end?
Did you remove the pallets from the action prior to refacing them and then refit them? If not it is more than likely that the pallets are no longer flush with the soundboard as the whole geometry will have changed due to the different thickness off the new facing.
To find the offending pallet what I have done in the past is to lift each pallet in turn and cover the hole with masking tape (a bit fiddly). Then test for leakage, this will allow you to find the pallet that needs adjustment.
-
Lester is spot on about removing and re-fitting the pallets, it is essential. Also check for weak springs, and tight pivot joints, with the springs released the levers should move freely under their own weight.
-
Yes i removed the pallets before refacing,thats the only way to do it on this box i guess. Its easy since they are screwed on,and maybe thats why there leaking,a waxed pallet always get right angle.
I know wich pallet is leaking most so its maybe a weak spring. Or maybe have to hook the action.