Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Gandy on February 10, 2010, 07:58:37 PM
-
Hi,
My Echo has a few keys that either make audible clicks, or have a scratchy feel when playing. I can see why this is, but I'm not sure of the best way to resolve either of the issues. I'd be grateful for any suggestions.
The clicks come from two places, firstly because some of the arms are so very close to each other that the slightest sideways pressure on the key makes the arms hit as they pass. See photo (sorry about the over exposure). I'm clear that some of the clicks are from this source, because they happen when the I play with the cover off the keyboard as in the photo.
Although a little clever bending of the arms could even out these close spaces, I feel that they would still be so close that the problem will still occur.
The scratchy feeling again comes when the keys move a little to the side of their at-rest position and the body of the key scrapes against the aluminium fingerboard. If it happens to be the actual top part of the key that touches, then that's another audible click. Again possible clever bending of the arms could get everything perfectly centred, but there's not much clearance so I can't imagine that it will stop that contact now and again.
I can't help thinking I'm missing something, so as I say I would appreciate any pointers. (Edit, hopefully that's the picture sorted now)
-
I've not made any progress, and its quite irritating when I play so I thought I'd bump this and add a picture to see if anyone has any solutions.
The picture shows a cross-section of a key and the fingerboard. When played, if the key moves sideways then the key rubs against the edge of the thin metal plate. If its the cork or felt parts of the key then I feel that as a catch in the movement, because of course a thin metal edge like that doesn't slide smoothly over cork and felt. If the key depresses far enough then the hard plastic button makes contact with a firm clank. Its made a bit worse because on some keys the felt under the button is slightly smaller than the cork or the button itself, which obviously makes it more likely to catch.
The funny thing is that there is glue on the underneath of the fingerplate, but I can't think of anything that could have been glued on that would help.
The only ideas I can come up with are either to dispense with the fingerplate, or to try a replacement plate of thick plastic - as thick as possible so that the holes form smooth surfaces for the keys to slide against.
-
1 - yes carefully bend the arms so the buttons are central in the holes - this can take ages!
2 - glue small blocks of either dense felt, or thick soft leather under the top plate to act as buffers between the buttons
-
Cheers. Do you think that wear and old age could mean that the keys have more side-to-side movement that they should? If so, is there any solution? It strikes me that the arms are quite long, and it wouldn't take much wear at the pivot to allow the key to move by 1mm or so.
I didn't have any luck with felt under the keyboard when I tried, but I have some thicker stuff that I can have another go with.
Thanks.
-
I've got the Echo too and made the following notes:
1. The inside row produce much less noise then the middle and outer rows.
2. Most of the rattle goes from the bass end.
I cope with the first problem developing the technique of pushing the button that reduce the noise. But I can do almost nothing with the left keyboard. Maybe it's possible to replace the left mechanics?