Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: OldDog on March 15, 2010, 11:14:19 PM

Title: Thumb Straps
Post by: OldDog on March 15, 2010, 11:14:19 PM
Hi,
I'm new to the list. I recently bought a Weltmeister 86W and am very pleased with it. Except for the thumb strap, that is. It's about 1/8th inch too short for comfort. Is there an easy way to get it off and punch a new hole in it? If the fingerboard was wood, then there would be no problem - just back out the wood screw and do the job. This one has a plastic (of some sort) fingerboard, and I don't know if there is a washer and nut on the inside waiting to come off an rattle around in there. I don't want to go to the trouble of taking everything apart to fix it. The alternative is to just get used to it.

Does anyone know how this thing is assembled?

Thanks for your help,
Paul N.
Title: Re: Thumb Straps
Post by: Andy Simpson on March 16, 2010, 07:03:36 AM
If it's anything like a Hohner thumb strap, which I suspect it is, then there's no easy way of adjusting it.

The real alternative is to stop using it...
Title: Re: Thumb Straps
Post by: HallelujahAl on March 16, 2010, 09:17:57 AM
Without getting into the mire of whether one should use the thumbstrap or not, I think that the easist solution is, as suggested already, to ignore it. However if, like me, you like to use the thumbstrap then maybe just putting less of your thumb into the strap might be a way to proceed. I'm not sure, maybe others more enlightened than me will be able to confirm this, but I suspect that the only 'proper' way of getting the thumbstrap replaced would be to remove the buttonboard. Alternatively I have seen some folk use an extra piece of leather attached to the strap as a kind of extension. If you use a pair of shoulder straps I don't really think a thumbstrap is necessary, and can safely be ignored.
AL
SimplePortal 2.3.5 © 2008-2012, SimplePortal