Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: WendyG on March 20, 2010, 12:05:36 PM
-
Okay, I still found my bellows rather stiff, so I decided to hang the Saltarelle as described on a previous posting. No harm came to the bellows and they do feel a little more supple. Only trouble is I used insulating tape to open the air button and a couple of bass notes, insulating tape came of easily enough, but the sticky stuff didn't ::). What is the safest way to remove adhesive from a wooden melodeon without damaging the finish.
Wendy
-
Lighter fluid.
-
Lighter fluid.
Don't smoke and only use matches for gas cooker.
Wendy
-
Meths or surgical spirit?....
(Not recommended for anything that's been French polished unless you want to melt the finish.)
-
What is the safest way to remove adhesive from a wooden melodeon without damaging the finish.
Use a cotton wool ball or tissue moistened with a little bit of white spirit, just enough to dampen it slightly. Gently rub in circles on the sticky patch. Should do the trick without lifting the varnish. Then rub over with a clean, dry, bit of cotton wool to remove any last traces of white spirit.
-
Goo Gone does what it says on the tin (erm... bottle).
-
Just occured to me, aftershave or perfume would probably work and be safer as well smelling a lot nicer than lighter fluid or white spirit.
-
Just occured to me, aftershave or perfume would probably work and be safer as well smelling a lot nicer than lighter fluid or white spirit.
I've used white spirit (for removing grease and goo, not for aftershave or perfume) and it works fine, trust me.
I would not use it on French polish, though, for the reason you mentioned earlier.
-
It certainly works but the smell is horrendous....then again, that's also true of a lot of aftershave and perfume...
-
White spirit would be my first port of call: test it on an inconspicuous area first if you are in any way unsure of the results, but I don't think Saltarelle have ever produced a french polished box!
-
eucalyptus oil is a very good product for "Removing sticky stuff" a less volatile or harmful to surface finishes than other suggestions
-
White spirit works, I rather like the smell...
-
There's an aerosol " Sticky Stuff Remover " which even removes harmlessly from most materials masking tape that has been left on too long or become damp. Try a tiny dab where it won't show before the main job !!
-
A small amount of WD40 on a cloth always works for me
-
A small amount of WD40 on a cloth always works for me
I'll second that, it's hard to find something that WD40 isn't good for, cooking perhaps? I used it to resurrect a phone with dirty contacts on the switch, to get all the manky old labels off of a second hand box, and the gooey stuff holding some velcro on the grille. :||:
-
Amazing how many different solvent suggestions. Safest thing by far is elbow grease and a little persistence.
-
I would disagree with that: constant rubbing can mark, either dulling the finish or creating a shiny area. It's better just to wipe once with the right solution than scrub at it, even with a soft cloth, for hours. Sticker residue is really hard to get off!
-
Thanks for the suggestions. In the end I used an alcohol-based eyeglasses cleaner, it has removed most of it but has left a very slightly tacky residue. I will see how it goes, and then may try WD40 or white spirit.
Many thanks
Wendy
-
Amazing how many different solvent suggestions. Safest thing by far is elbow grease and a little persistence.
Modern reactive finishes like polyurethane or polyester aren't solvent-based so once they've cured they're very durable and will resist most commercially available solvents with no ill effect but as LJC says, rubbing at them vigorously enough to remove residue from tape or stickers will wear, mark or shine them up. It's older finishes like nitrocellulose or french polished shellac where the finish is dissolved in a solvent that evaporates after application to leave the finish behind on the surface that are susceptible to solvents.
As far as being safe for the person doing it, unfortunately, there's a strong negative correlation between how safe something is to use and how well it works. White spirit or ligter fluid will have sticker residue off in no time with little effort but you've got to be careful whereas alcohol wipes or something like eucalyptus or tea tree oil will be a lot safer but require more effort.
-
Can tea tree oil be used for anything else to do with melodeons?
Nigel
-
Certainly not lubrication!
-
I have had success removing "sticky" from wood where these stickers from DIY stores leave a residue by dipping a finger in talcum powder and rolling the "sticky" into little balls. A pencil eraser can also be useful.
-
Can tea tree oil be used for anything else to do with melodeons?
Nigel
It's supposed to be good for fungus infections on nails ???