Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Ollie on April 01, 2010, 08:15:39 PM

Title: Pokerwork caseing
Post by: Ollie on April 01, 2010, 08:15:39 PM
Does anyone know what sort of wood the Chinese Pokerwork's are made from? I've been thinking about changing the decor of mine and I'd like to have a practise first to see if what I have in mind works and looks good.
Title: Re: Pokerwork caseing
Post by: Pushpull on April 01, 2010, 09:05:44 PM
Does anyone know what sort of wood the Chinese Pokerwork's are made from? I've been thinking about changing the decor of mine and I'd like to have a practise first to see if what I have in mind works and looks good.
Old orange boxes I think.  :D
Title: Re: Pokerwork caseing
Post by: Andy Simpson on April 01, 2010, 11:35:24 PM
Haven't actually seen inside a Chinese Pokerwork but I'd be willing to bet the case is made of some cheapo asian or south american generic hardwood based ply or possibly birch ply. Nothing that would look nice by itself anyway, what were you thinking of doing?.
Title: Re: Pokerwork caseing
Post by: Ollie on April 01, 2010, 11:44:20 PM
Stripping it down to the wood, staining it with either green or light brown woodstain, then using pyrography to do some oak leaf, green man type designs.
Title: Re: Pokerwork caseing
Post by: Andy Simpson on April 02, 2010, 12:00:52 AM
Sounds interesting, if it is plywood then as you're removing the original finish you might go through the outermost ply in places and leave areas where the stain won't take.

The golden rule of woodfinishing is to test in an inconspicuous area first and the inside of a closed box is about as inconspicuous as it gets, why don't you have a go on an area of the inside first?.
Title: Re: Pokerwork caseing
Post by: Ollie on April 02, 2010, 12:07:19 AM
Looking at it, I don't think it is plywood, in fact I'm sure of it. It is certainly quite soft though, could it be pine?
Title: Re: Pokerwork caseing
Post by: Andy Simpson on April 02, 2010, 12:30:47 AM
Is there are unpainted edge anywhere that allows you to either see the layers of plywood or the grain of solid wood?. I'd be really surprised if it was solid wood at that price, both the more expensive Erica and Morgane have plywood cases.

It could be spruce ply but I doubt it would be pine if it is solid wood. If it is a solid wood that's soft and pale in colour I'd make an educated guess of some species of Lime/Basswood. Whatever it is, I still recommend trying what you want to do on the inside first.
Title: Re: Pokerwork caseing
Post by: Ollie on April 02, 2010, 12:40:42 AM
Yes, the grain is easily seen through the black paint. Interesting that it isn't ply though. I will certainly try stuff out on the inside of the box.
Title: Re: Pokerwork caseing
Post by: Andy Simpson on April 02, 2010, 12:54:49 AM
It should be relatively straightforward then if it's something like lime or alder like a 1930s Erika/Club II, just make sure the surface is well prepared so the stain takes evenly and doesn't come out blotchy.
Title: Re: Pokerwork caseing
Post by: Theo on April 02, 2010, 10:07:45 AM
All the pokerworks I've seen, Chinese as well as German, are made of solid timber.  I don't know what timber it is, certainly not pine, it has very little obvious grain, no knots, pale colour, could be alder, black poplar or something similar.   

If stripping down and refinishing it could be worth while taking off the metal corner pieces while the work is in progress.  They are a tight push fit.
Title: Re: Pokerwork caseing
Post by: Rob2Hook on April 02, 2010, 11:58:38 AM
I was reminded of young Sue refurbishing her rather tatty Pokerwork by stripping, painting matt pale blue and adding those stick on mouldings in white - hey, presto, a Wedgewood box!

Rob.
SimplePortal 2.3.5 © 2008-2012, SimplePortal