Melodeon.net Forums
Discussions => Recordings and Videos => Topic started by: TonyRussellDavis on April 23, 2010, 08:55:45 AM
-
I used Audacity for the first time yesterday to record. Seemed simple enough - click the red button and go. Imagine my surprise to find the playback was two semitones sharp. I found the "change pitch" control and that "thought" the tune was in F. The melodeon is in D and the recording played back in E! The help dialogue says the program "senses" the correct pitch but it doesn't seem very good at this and thinks that D is F, making correcting it a bit of a (double) transposing nightmare. :o
Can anyone point me to a control that will override the "pitch sensing" thingy, or it my experience a one-off? Anybody found this? Does it think I'm recording clarinet in Bb, or brass :-\ BLT.
-
That seems extraordinary. I've used Audacity for a long time for straightforward recording and playback, and it's always been a "what you hear is what you get" process, like any other recorder (tape, H2, Edirol etc). In my experience, pitch change, like all the other effects (tempo, fade etc) can only be applied to a selected track or portion thereoff. If you don't select anything, it shouldn't be modified in any way. There doesn't seem to be any set-up that would invoke "on-the-fly" frequency change as some thing is being recorded.
Were you doing a straightforward recording into a microphone connected to the computer, or was there any intermediate stage, e.g. into a recorder then into Audacity?
-
Yup - same here, it's never messed me around before. However, here's a suggestion. Try recording something new from scratch. But don't highlight any sections of the track or try to make any adjustments. Is it still altering the pitch? Because if you select any part of track it appears (from my experiments) that it detects the pitch of the piece that you've selected - not necessarily the pitch of the whole track. AL
-
Very strange but could it be that your sound card is not operating at the same sampling rate that Audacity thinks it is? If you recorded at 44.1kHz and played back at 48kHz that would be about 1.5 semitones high.
I've never heard of a "pitch sensing" feature in Audacity, but I have sometimes wondered if the pitch was wandering while playing back. Better investigate - it must be something that can be turned off and I certainly don't want it.
-
Very strange but could it be that your sound card is not operating at the same sampling rate that Audacity thinks it is? If you recorded at 44.1kHz and played back at 48kHz that would be about 1.5 semitones high.
I've never heard of a "pitch sensing" feature in Audacity, but I have sometimes wondered if the pitch was wandering while playing back. Better investigate - it must be something that can be turned off and I certainly don't want it.
Interested in this too as audacity is not too clear about how you use the pitch switch anyway -- is it DEFINITELY the case that when you run the cursor over the waves to highlight the toon, then go to effect and then pitch that what is showing is the current pitch???
I have not come across this autotakeover of pitch now being discussed but maybe I was just not seeing/hearing it ......
-
The guess of audacity is only the default choice; you can always change it in the 'change pitch' dialog box to transpose from anything you like to the correct pitch. But first check whether this is really a pitch change or if it's just playing back too fast. If the played back sound is slightly shorter (faster) than the original recording it could indeed be a soundcard problem. (Increasing pitch by playing back too fast is much easier than the change pitch algorithm.)
-
what type of computer/which operating system are you using?
I don't believe audacity has a setting to transpose or change key as it records - you can meddle with the key after you've recorded something but not during a recording, I believe -
try uninstalling the app and reinstalling it to get back to the defaults -
-
A lot of replies, I need a time slot to re-read them for a proper look. Meanwhile - in a nutshell, I installed the software, pressed record and played into the computer's built in mic. never messed with anything until after I'd played it back.
Got to go to see to the horses now but later today I'll have time to clart about with it - maybe even un/re-install. Will let you know, thanks for all the interest, BLT.
-
A lot of replies, I need a time slot to re-read them for a proper look. Meanwhile - in a nutshell, I installed the software, pressed record and played into the computer's built in mic. never messed with anything until after I'd played it back.
Got to go to see to the horses now but later today I'll have time to clart about with it - maybe even un/re-install. Will let you know, thanks for all the interest, BLT.
I should make clear that I am only changing pitch on imported mp3 and saved aup (audacity)files etc recordings already done by others (e.g.TOTM) so I can slow them down and adapt to try to practise them on CG box.
I am not recording any of own playing direct to Audacity.
Another twitch with Audacity: when I locate an already saved aup file in my PC directory and try to "open with" Audacity, it says it can't coz it is a FAT 32.
So I have to launch Audacity first and drag the file over'
OR of course, launch Audacity and go to file, 'recent' and click on the saved recent aup file... bit of a pain....as I nearly always try clicking on my PC directory file first!