Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Christopher K. on May 15, 2010, 11:04:07 AM
-
Finally having access to the wood shop at the university, I'd like to use my free lab time to build a box! :||: I plan to copy the interior, exterior, and keyboard dimensions from one of those two-voice, two-row celluloid covered "Pokerworkish" Hohners from the 30s-50s period. Mine is going to be hardwood veneer over plywood, with a two-piece keyboard "shell" -- routed solid wood lower and finish veneer upper. I'd purchase hardware, bellows, and all the other bling from aftermarket sources or salvage. I'm considering building the reed blocks but haven't decided, yet.
I'm wondering about a few things. First, the functionality of my bass panel air vent layout: Hohner uses a certain layout of circles on their 2-voice boxes from the period, which is largely the same on today's Pokerworks. The pattern works well: proper airflow makes the basses easy to play, reeds are not choked into silence or valve buzzing, and the tone and volume are both agreeable. If I calculate the total area of the circles in the Hohner pattern, and rearrange that same amount of space into a different pattern that is more aesthetically pleasing, will my redesigned panel breathe the same or at least in a similar way? I'd try to keep the design somewhat "open" so that air could flow through and wouldn't be pinched off at excessively small apertures.
Second, which woods are best for the carcase frame, reedblocks and pallets? I'd like to keep the frame lightweight as possible without sacrificing strength. I'm considering furniture grade European birch plywood over the cheapo fir or pine stuff down at the lumberyard. Should I even care if it is going to be covered by veneer? And which wood is most important for the reed blocks and pallets, or can it be anything that isn't too soft?
I'm hoping some of the other members of the forum who have built their own boxes might care to share their experiences. I plan to post pictures along the way, starting this fall and maybe this summer. The shop also has a CNC machine so there's the chance that I could do something interesting for an inlay on the cabinet. Thanks in advance! (:) :||: :||: :||:
Chris
-
The faceplate and bass end plate of the boxes we made at Stowmarket recently were made of pre-veneered ply. Not thick enough for the frame, but I assume you should be able to buy it in a range of thicknesses.
-
What are you going to use for the action?
-
The better quality the wood, the easier will be to work (depending on the sort of tools your using). I would certainly go for a good quality spruce over cheap pine. Best bet is to go to your local timber merchent, as they will have a better knowledge, plus most timber yards are used to poeple making musical instruments these days.
I've just finished my first self build, and am working on my second. For the action I used brass that was intended for modelling, but there ae some shortcomings of this, best bet is to experiment, and you'll quickly find out waht works.
I'm interested by the method you intend use though, as I have been thnking about something similar for a 2 1/2 I'd like to make. Though I prefer solid wood, as frankly I find ply very nasty with hand tools. Anyway keep us updated on your progress!
-
The bass and treble action will either be salvaged from a fleabay box or I'll try to order them from Hohner (if they sell a complete works). Most likely I'll take them from the junk instrument, especially if I don't have the time (or crash and burn!) doing home brew reed blocks. New bellows will come from a dealer unless the set from the graveyard is serviceable but I'd prefer them to be new. Same goes for straps, brackets, keys, and other doodads. These decisions are a ways off, though.
If I build with plywood substrate, block corners and outer veneers as initially planned, then the bass panel, treble grille, and soundboard will all be made of solid wood, same species as matches the veneers on the cabinet.
I thought about doing the whole thing in solid wood -- leagues easier to work, and much easier for me to enjoy knowing it's not a plywood hat box -- but the strength, cheapness, and simplicity of building with plywood make it attractive. My other idea is to join a sturdy cabinet carcase and fit solid veneer right on top of that, skipping the plywood substrate. I'd like to let the corners and the veneers both show in the final work but haven't sussed out how I'll do it. I'm still reading through all the relevant threads in the forum and putting ideas together.
I'm leaning toward maple or cherry veneer or panels, of which there is hardly a shortage in this neck of the woods.
-
You have Engelmann (sp) spruce out your way.. good stuff.
Explore hobby shops for aircraft plywood.
-
If I build with plywood substrate, block corners and outer veneers as initially planned, then the bass panel, treble grille, and soundboard will all be made of solid wood, same species as matches the veneers on the cabinet.
That's the wrong way round, the case is so much nicer made from solid wood and the bass panel, grille and "soundboard" are best made from ply. Good quality ply is actually surprisingly expensive and then there's the time and cost of veneering so you may as well use solid wood for the case and keyboard and use thin veneered ply for the bass panel and grille with plain thin aircraft ply for the baseboards.
Alder is the preferred wood for reedblocks amongst traditional builders as it's very stable and holds nails and screws very well, which isn't such an important consideration if you're waxing the reeds on, and old Hohner blocks I've seen are spruce and beech. You could use almost any good quality, well seasoned hardwood.
-
2.msg50757#msg50757 date=1273939193]
If I build with plywood substrate, block corners and outer veneers as initially planned, then the bass panel, treble grille, and soundboard will all be made of solid wood, same species as matches the veneers on the cabinet.
That's the wrong way round, the case is so much nicer made from solid wood and the bass panel, grille and "soundboard" are best made from ply. Good quality ply is actually surprisingly expensive and then there's the time and cost of veneering so you may as well use solid wood for the case and keyboard and use thin veneered ply for the bass panel and grille with plain thin aircraft ply for the baseboards.
[/quote]
[/quote]
It depends on your design objectives: weight for weight aircraft ply is stronger than solid wood (which is why its used for aircraft) if you want to keep weight to the minimum ply will let you build from thinner material for the same strength.
-
If using ply (in the UK) then go for Finnish Birch, Latvian/Russian is a lot cheaper but has lots of problems in the hidden layers (knots, resin, holes etc).
Veneering over ply is an art in itself, not to get the veneer to fit but to get it to look like it's not veneered. Veneered wood also shows dings and chips a lot more than natural wood.
Where are you based? That will have a big say in what is easily available.
Have fun
Steve
-
It depends on your design objectives: weight for weight aircraft ply is stronger than solid wood (which is why its used for aircraft) if you want to keep weight to the minimum ply will let you build from thinner material for the same strength.
Agreed, but I think solid wood has a look and feel that even well veneered ply can't replicate and is much nicer to work. Ply can make an excellent box, (weren't Oakwoods made with thin ply panels over a frame?), but I don't think solid wood is such a good idea for a grille or baseboard, I'd be interested to see how Castas with solid WRC ones hold up in years to come.
-
Pros on ply
Strong
Resists warping
Resists expansion,contraction
Resists cracking
Usually dense
Affords using thinner material
Pros on solid wood
machines well
Can be lighter than ply
Can be more resonant
-
Pros on ply
Strong
Resists warping
Resists expansion,contraction
Resists cracking
Usually dense
Affords using thinner material
Pros on solid wood
machines well
Can be lighter than ply
Can be more resonant
Without wanting to open that can of worms *again*, "can be more resonant" is *not* a pro for a squeezebox -- the last think you want in a free-reed instrument is resonances sapping energy from the reeds. It's not a violin, the way the sound is produced and propagated is totally different, and material resonances are a bad thing not a good one.
Solid wood is indeed lighter than ply for the same thickness, but aircraft ply is so much stronger that you can build a lighter box with it because it can be a lot thinner. If this wasn't true, *aircraft* ply wouldn't exist because people would use thicker stronger wood to build them :-)
Regarding looks, using veneered ply panels set into a hardwood frame (like Oakwood did) means you can build boxes which look and feel great (but different) which wouldn't be practical in solid wood -- using bird's eye maple as anything other than a thin veneer would be structural suicide since it's completely full of knots and burrs, but as a surface veneer it looks fantastic.
Ian
-
Just a thought, how many wooden ended Lachenal concertinas have we seen with splitting fretted ends where the wood has given out?
Steve
-
...... using bird's eye maple as anything other than a thin veneer would be structural suicide since it's completely full of knots and burrs, but as a surface veneer it looks fantastic.
.....
Birds eye maple is not that rare for violins. It's not the easiest to work but it's quite do-able. I've got a BEM back and ribs upstairs for an Amati style violin that I never finished....
-
There's a lot of BEM electric guitar necks out there and I've seen backs and sides made from it as well. I'd have no reservations about using it for a box.
-
While I wouldn't use BEM for the load bearing columns in a house, for things like guitar necks, the grain orientation matters more than any instability caused by the defect of the figure. That's why PRS, Fender, Warmoth, and others like to use it for necks of their deluxe models. This grain orientation vs. strength attribute is hardly true with a wormy or spalted maple, which I think make better examples of when not to use a figured wood under stress, but it is also true with heavily figured bird's eye maple and Ian's point was well made.
I started drawing some of my ideas to see if they make sense. The first idea is a hardwood frame not unlike a cabinet carcase. The frame has rabbeted inward facing upper edges to accommodate thin, solid panels (not veneer). Bass and treble "soundboard" members (both ply) are slid into dadoes through the frame and glued in place. Seems like it would be heavy, though, unless I built it from basswood.
The second plan departs from the frame concept and joins the corners of 3/8" solid panels with a miter joint that is supported by glued interior corner blocks. Dadoes accommodate the soundboards. This is a more like a Hohner but without those metal corners on the outside.
I've read through some old discussions about what makes an accordion sound "good" and I'm completely convinced that it has nothing to do with the wood of the cabinet or soundboard. Soundboard seems like something of a misnomer. My vocabulary in an earlier post was confusing. When I noted a solid wood bass panel, I meant the exterior panel that is under the hand strap and containing the feet, air/sound holes and air button. I did not mean the panel which touches the pallets and reed blocks. If there is any wooden component of the accordion that has the potential to influence the tone in any way, then this exterior bass panel under the strap is it. It is a non-block touching, post-reed and pre-ear surface through which the sound travels. And even though the wrist is resting on it, the soundwave travels right through it so it does transmit sound although more leaves through the holes. I thought a piece of solid maple would be a good choice for this panel, why not?
The two panels inside the accordion that touch the pallets on one side and reed blocks on the other should be ply only. I've only ever seen this part as ply except once when I bought a cheap, nameless East German box where these panels were made of hard plastic -- not wood. It transmitted vibrations so wickedly that the bass and treble valves vibrated and sounded like someone was playing the comb whenever a note sounded -- you know, one of those old timey kazoos made from a hair comb and wax paper. Or if you've ever played in a group with electric amplifiers that continually buzz the snare drum, you get the idea of what was happening.
Thanks for all the input, this is geting to be fun! I can't wait to actually start putting it together. The local hardwood supplier sells alder for $5/bf, and both purpleheart and nicely varigated paduk for $8/bf so I'm leaning toward purpleheart or paduk for the cabinet panels.
-
RE Purpleheart and Padauk.
Both woods are irritants (use masks etc) and Padauk dust is really fine and gets everywhere.
Purpleheart is incredibly tough on tools (it's full of silica) and ideally needs carbide blades to work it. Some of the species of Purpleheart (from memory there are about twenty) are nearly extinct through over logging so I would suggest using FSC sourced wood.
Steve
-
I've never worked purpleheart before. I understood that it was a pain in the neck to work but not the toxicity issue so thank you. Luckily the school's shop has some serious extraction units. I always try to buy from FSC sources, or even buy instruments made from that lumber so it's definitely a consideration. In a tech mgmt. class this March I did a presentation on dwindling wood supplies and the future of luthierie. The situation is worse than it is comfortable thinking about.
I've been looking at a lot of construction photos and videos over the web and the Bergflodt box is interesting. Seems that he has the framed look I want, but he did it by gluing (not joining) thin strips of dark wood to solid wood panels. That would save wood and work. The panels appear to be quite thick, too. Could anyone tell me if his boxes are very heavy?
-
I've read through some old discussions about what makes an accordion sound "good" and I'm completely convinced that it has nothing to do with the wood of the cabinet or soundboard. Soundboard seems like something of a misnomer. My vocabulary in an earlier post was confusing. When I noted a solid wood bass panel, I meant the exterior panel that is under the hand strap and containing the feet, air/sound holes and air button. I did not mean the panel which touches the pallets and reed blocks. If there is any wooden component of the accordion that has the potential to influence the tone in any way, then this exterior bass panel under the strap is it. It is a non-block touching, post-reed and pre-ear surface through which the sound travels. And even though the wrist is resting on it, the soundwave travels right through it so it does transmit sound although more leaves through the holes. I thought a piece of solid maple would be a good choice for this panel, why not?
Ply is readily available in the consistent thickness you want, a thin unsupported panel is considerably less susceptible to warping and will save a great deal of time compared to solid wood.
The parts aren't "transmitting" sound anyway, the surfaces of them are either reflecting or absorbing it so the nature of the surface is far more important. The best example is the noticeable difference in sound gained from finishing the inside and reedblocks of an accordion which is comparable to going from playing an instrument in a carpeted room lined with curtains to one with bare walls and a wood floor. As you say yourself, the hand and forearm are right against the panel so any resonant properties of the chosen material are effectively neutered and it's doubtful that they'd make any audible difference anyway. Everything you said about the bass panel is also true of the casework, minus the hand resting on it, but you're completely convinced that doesn't make a box sound good?.
*edited to add*
The rest of this discussion is pretty much inconsequential unless the reedblock design is sound and the reeds are good and secured, valved, set and tuned properly.
-
Varnishing interior surfaces does make a difference, whether it's reflection or rigidity; I've observed the differences myself in several boxes. To clarify, varnishing aside, what I'm convinced of is that the differences in sound obtained through ply or different species of solid wood used for casework are very minor and almost negligible. I don't think that I'm going to get a better tone from a box of solid tonewood casework (or I wouldn't own so many boxes made of plywood or covered in celluloid). I'm only choosing solid wood for the casework because it's the same price as the grade of plywood that I wanted to use, easier to obtain, and easier to work with. The drawback could be weight. Keeping the thickness around 3/8" should help, which is about as thin as I'd like to take it and still be able cut the grooves for the soundboard.
I know for a fact that the wood of the bass panel (the exterior one) does matter a small amount to the final sound of the box and that sound waves are transmitted through this panel. The casework does not function the same way because the sound propagates along the airstream leaving the holes under the pallets. As an experiment I once taped up those holes on my Pokerwork to see how the bass chamber would sound. It obviously couldn't breathe and so it didn't play very well but there was sound leaving the chamber through the panel. I replaced the taped-up wooden panel with one made from a rectangle of stiff fiberboard that came in a large packing container to see how it changed. It still didn't play very well or sound too hot but it sounded quite a bit different than the wooden panel. So I'm going to use a piece of thinnish maple for this. It will also look nice against the paduk or purpleheart. Purpleheart is looking less attractive to work with with each day..
It's minutiae because as you say, the whole discussion is pointless unless it functions as an accordion should. And that is why I will be using salvaged Hohner reedblocks, and take the thing up to SLC to have it tuned. I don't really feel up for wading into the tuning game at this stage. Maybe next year! (:) (:)
Chris
-
Remember to glue your veneer on both sides of whatever you decide to put in between, otherwise you may be in for a nasty surprise. Gluing gets a lot easier if you have a shop press (I find the inexpensive Chinese manually operated hydraulic presses very useful).
-
Purpleheart... also known as nazarena in So America is used for timber framing, railroad ties, bridges and truck beds.
My personal opinon is that a little goes a long way. I do not care for it at all and don't use it..maybe if I was building a pier. Hideous would be my version of being nice as a description for Purple heart.. yechhh.
Birds eye maple.. another wood that goes a long way. A little is enough. Guitar necks, backs and sides, .. it's ok
Spalt.. spalt is a fungus growth that leads to rot and decay. Catch it at the right time and it looks good. I llike it in small bits.
Solid wood as opposed to ply in instrument use.
In resonator guitars where the sound production comes form a metal cone excited by string vibration.. there is an age old debate
of the plywood builders vs the solid wood builders. Some consider the guitar body a speaker cabinet and use ply, others insist the wood adds to the package and use solid wood. Note that some use both and there is an "upcharge" for solid wood.
I can see this same debate applied to accordeon construction. I agree there is probably more to be had from reed block and reed quality and construction technique than form chassis material..
One of the differences between similar models of Saltarelle and Serenellini uised to be the use of solid or ply,not sure if this still apllies.
Padauk. I like it and use it. The best used to be from the Andaman Islands but long gone..denser, redder.
Spanish guitar makers use it as an in between cypress and rosewood for backs and sides, usually for flamenco guitars. They call it "coral"
Alder at $5 a board foot.. Around here it's $2.50 a board foot and I cut my own off my property..I have about 500 board feet.
One of these days I'll get around to sending some to Rees...
A few years back Alder was considered a nuisance or weed wood and loggers burned it. Marketing raised the bdesireability and price
-
I'll probably be buying the lumber from MacBeath's in Salt Lake. I don't have too much of a choice if I want to choose the pieces myself. Any additional cost could be because they surface two sides, which I don't really need because I'll be milling it further for my own purposes but yeah... $2.50 would be nice. Where do you live? (:) Would prefer quartered purpleheart but may have to pay extra for a custom cut.
I don't care for the appearance of purpleheart when it isn't finished with a UV blocker because it gets too brown. Pier, ha.. yes that's about right. ;D But it can keep its purple color for years to come if finished correctly and it can be restored by removing the finish and refinishing. I don't think there's anything else like it. I'm not real keen on bird's eye maple but love the flamed and quilted stuff. Wish I could find some tamo or quilted ash around here or on the net at a decent price. That's another very hard wood that seems to find its way into a lot of projects.
Later on I'll try to post some .pdf's of the CAD sketches I'm doing.
-
This chair is a good example of why I like purpleheart. If I could find a piece with even a little random curling in it, I'd be set!
-
That is just soooooooooooooooooooooooooooooo special.
Wonder what it's like under a black light ?
That is the very reason I don't care for purpleheart.
Kinda like, how much Liberace can you take ( if any at all)
Want some purplelheart, plenty locally, glad to cut and ship for you. Quarter sawn.. I'll check it out.
Glad you like it.
I am in the state of Jefferson (look it up.. yes it's real)
West of you a couple states.
You want some alder... give me the sizes
And yes Rees, I have some saved for you... give me the finished sizes again..
-
Kinda like, how much Liberace can you take ( if any at all)
My grandfather, a good fellow if a little misled or outmoded in his thinking... loved Liberace. But alas he was of the old school and couldn't accept Lib's sexuality, insisting that he just had good taste in fine clothing and knew how to dress. Grandpa was fond of white patent leather shoes and white leisure suits with gold buckles so who knows.
A little later on I might take you up on the lumber.
-
Anytime... I have plenty... enough that all you would need do is pay the shipping, and that would be cheap if I dimension it for you.
-
[...] using bird's eye maple as anything other than a thin veneer would be structural suicide since it's completely full of knots and burrs, but as a surface veneer it looks fantastic.
Accordéons Mélodie in Montmagny, QC have been using birdseye as solid wood (not veneer) for at least a decade. I'm sure that they need to be very selective regarding particular pieces, but I never heard about a "structural suicide" of a Mélodie.
Also, I have several nice birdseye boards at home, none of which are full of knots and burrs, unless that is what you are calling the "birdseyes" themselves. (I agree with Jeff, this wood should be used sparingly... ) The only issue I've ever faced with birdseye is that if one is not careful, while thicknessing the boards in a machine some of the "eyes" might pop out. This affects surface quality but not the overall structure, and the problem is easily solved with a properly tuned handplane. I've seen some very punky pieces of birdseye but would simply not use them for a piece requiring structure -- there are plenty of boards here (in the Green Mountains) that are clear of knots/burrs/etc.
Ian, since you described birdseye maple in this way (full of knots and burrs) I seriously wonder if we're hoarding most of the good stuff in Quebec and Vermont?
-
In the UK I think the equivalent to Birdseye (or at least the one I would use) is a nice piece of figured or fiddleback sycamore, same family as the maple and usually knot free. I've a couple of six foot boards in the workshop and they're defect free and not too hard to work.
Steve
-
I found a company that sells figured cherry lumber by mail order. I called him on the telephone to talk about some things not mentioned on the website and liked what I heard so I'm switching to cherry. He's putting more lots up next week, too. :||: :||:
http://www.curlymaple.com/pvtstkcherry.shtml
-
Another way to deal with thicknessing birdseye is to use a drum sander.
No chip-out
-
I found a company that sells figured cherry lumber by mail order. I called him on the telephone to talk about some things not mentioned on the website and liked what I heard so I'm switching to cherry.
If you fret the grill out of cherry experiment with blade sizes and speeds first as it (like most fruit woods) is prone to burning and it takes forever to sand the burn marks out. For a grill (up to 6mm depth) I'd use a Number 3 blade and turn the speed down.
Steve
PS you should try cutting plum (:)
-
The surface area of an accordion is rather small, regardless of what wood you pick you will want to make sure that the pattern in the wood is small enough to be captured by the accordion.
One little tip on the sound board is to bevel the perimeter slightly so when you glue it to the frame it will be easy to assemble. Nothing worse than going to assemble something that went together great with a dry fit only to have the wood expand when the glue is applied.
Can't wait to see some pictures!
-
I'm curious about how this project came out. Any photos? New thread?
-
I'm curious about how this project came out. Any photos? New thread?
Nada. I was upset about it.
The program took on too many enrollments this semester and did not increase the number of instructors. As a result, the shop is crowded and the former walk-in policy regarding lab work was changed citing a safety issue. Now, no work may be done outside of class time. I got the go from the instructors, but having only 1.5 hours a day, four days a week, an additional project on top of the two required for the class made it, well, impossible.
-
I"m very sorry to hear that. Maybe later. Where are you located?
Ed
-
I'm in Utah (Valley). In the meantime there are some smaller projects that I can do from home, and get moving on the pile of broken accordions around here. The wife will like that!
-
In the UK I think the equivalent to Birdseye (or at least the one I would use) is a nice piece of figured or fiddleback sycamore, same family as the maple and usually knot free.
Not quite - "fiddleback" maple or sycamore is quarter-sawn and the "rippled" pattern results from the play of light on the medullary rays. "Birdseye" is normally slab-sawn and the pattern of dots & swirls is a a result of irregular growth.