Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: smiley on May 17, 2010, 01:14:11 AM

Title: Castagnari Button sizes
Post by: smiley on May 17, 2010, 01:14:11 AM
Keithypete's mention of button size & spacing prompts me to ask if all diatonic Castagnaris models have the same sized treble buttons. I'm thinking of buying a Castagnari Dony but found the buttons a bit small on a Benny I played (compared with a Baffetti BP). There isn't anywhere on my continent that I can compare a range of melodeon models, so I thought I'd ask around here.
Title: Re: Castagnari Button sizes
Post by: Theo on May 17, 2010, 08:40:16 AM
I've split this into a new topic since it is a distinctly different question from "Flat vs stepped"
Title: Re: Castagnari Button sizes
Post by: Rob2Hook on May 17, 2010, 10:29:12 AM
The simple answer is no.  Buttons and spacing vary to suit the overall dimensions of the model.  The Benny is one of the range of models that Castagnari categorise as "compact", so the keyboard is smaller than average and therefore the buttons closer together.  Larger models have increasing sizes of buttons and wider spacing to suit.

Rob.
Title: Re: Castagnari Button sizes
Post by: ganderbox on May 17, 2010, 11:33:21 AM
If it helps.....the buttons on my Dony are 15mm diameter. The spacing between the rows is also 15mm (the edges of the buttons line up with each other). The vertical spacing is about 19mm.
Title: Re: Castagnari Button sizes
Post by: smiley on May 17, 2010, 02:02:02 PM
Thanks for the good info  (:)
Title: Re: Castagnari Button sizes
Post by: tedrick on September 27, 2010, 12:21:19 AM
just got back from playing my friend's Castagnari Dinn III - it is a wonderful box but the button spacing is a bit tighter than on my paolo elite II and hohner presswood - so, it would take a bit of getting used to - but the action and sound of the box are very nice. It is also very light - it is a very refined box.
SimplePortal 2.3.5 © 2008-2012, SimplePortal