Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Ollie on May 29, 2010, 11:17:19 PM

Title: I really hope not...
Post by: Ollie on May 29, 2010, 11:17:19 PM
... but I think a reed is about to go on my box. The low D/E button my D row is definitely beating slower than it was. Anything I can do to be sure?

Anyone fancy buying me a new box?  :(  :P :-\
Title: Re: I really hope not...
Post by: Steve_freereeder on May 30, 2010, 12:38:32 PM
... but I think a reed is about to go on my box. The low D/E button my D row is definitely beating slower than it was. Anything I can do to be sure?
It is probably not as bad as you fear. Reeds do go out of tune after a while, particularly if they are often-used notes, which your D/E probably is. Only a slight deviation of pitch is required to change the beating rate noticeably. This doesn't necessarily mean that the reed is about to fail. A reed which is suffering terminal fatigue will be developing microscopic cracks and will go significantly and irretrievably flat (perhaps a semitone or more) before it eventually breaks. I've only had this happen to me once, with a cheap brass-reeded concertina.

What instrument is this on - is it your Pokerwork? Hopefully, the remedy in your case will be a touch-up retune. I'm sure Theo and others can advise further.....
Title: Re: I really hope not...
Post by: Ollie on May 30, 2010, 12:41:45 PM
 Well, I'm thankful that it's not as bad as I thought it was. Thanks Steve.  (:) It is indeed my Pokerwork.
SimplePortal 2.3.5 © 2008-2012, SimplePortal