Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Steve C. on June 23, 2010, 02:38:02 AM
-
Just today I had a nice visit with Michael Usui in Sarasota, where he worked some minor magic on my DG Pokerwork. Very much recommend his tuning (nice tuning, dried out a wee bit), replace bass valves (the best/cheapest air management fix I could imagine), and best: install treble bi-level pad plus re pad the treble pallets. (I almost miss the clacking, but not quite). Nice guy, good work, very convenient for the States.
-
Michael has worked on 4 of my boxes. He has a Double Ray and a Globe of mine right now. The DR he is fixing the Button action and tuning and the Globe he is totally refurbishing. I highly recommend him. He can talk your ears off when he talks about Accordions and the technical side of the trade.....that is what makes me like him. I trust him with my boxes. His work has always been top notch. He ain't cheap though but when your the only game in town...... Steve I believe your in NC like me?
-
I started out on a dancemaster and really enjoyed it - it was a great box - I traded it in when I moved up to a new 80s flower grille Paolo 4 voice this past spring - Michael did a fantastic job tuning it - it still has the Paolo sound but with Binci reeds in it, it sounds like butter.
We are lucky to have him here in the states.
-
I have installed Dancemaster keyboards on both my Erica and my old presswood Pokerwork -- removeable top, felt padding installed beneath the levers. What a difference!
Bob
(And I have heard Reed's Paolo in person......it sounds great!)
-
I wonder why he is not building any new boxes at this time ? I was set to order a c#/d Sarasota model.
Could be he is out of components.
-
Could you give a more detailed description of the "Dancemaster" keyboards, photo perhaps. ?
-
Not sure that I have any photos....I'll have to look around, but it won't be until I've been to the grocery store and cut the lawn, etc. etc.!
They are the same size and shape as the Hohner keyboards that they replace -- Lyre-shaped on the presswood, rounded corners on the Erica. The outer edge is several pieces of glued-up lumber, the back is thin ply glued in place, the top is thin ply with 8 or so small screws for removal.
The first one I ordered came with felt already in place. By the time I ordered the second, he'd stopped doing that, but it was a simple matter to glue in some furniture felt I bought at the local home store.
Hope that helps.
Bob
-
The keyboards seem a tad expensive to me at $75 for the one piece and $95-$150 for the two piece, mind you that is installed
http://www.irishdancemaster.com/reedtuning.html (http://www.irishdancemaster.com/reedtuning.html)
-
A bit, perhaps, especially considering that mine were sent to me and I did the installing and adjusting myself. Still preferable to sending the whole box there for something that can be accomplished with relative ease at home. Plus, I was first able to fill the grain and enamel the whole thing in gloss black to match the original look.
Bob
-
Could you give a more detailed description of the "Dancemaster" keyboards, photo perhaps. ?
Not sure that I have any photos....
??? Slight sense of déjà vu here.... look at the last post on this page (http://forum.melodeon.net/index.php/topic,2491.20.html) and the following exchanges and you'll find the photos Jeff was looking for then (nine months ago) and now.
-
I wonder why he is not building any new boxes at this time ? I was set to order a c#/d Sarasota model.
Could be he is out of components.
They're fettled Chinese boxes, not sure to what extent, so he's probably having supply problems with them.
-
Wow, Steve......you're right! It is like deja vu, all over again!
Imagine me not remembering something.........
Now, where were we?
Bob
-
Okay not sure if these are the keyboards people are talking about. He installed what he called the Walsh keyboard on my souped up Hohner B/C I am pretty happy with it and here it is with another lesser priced model called the Weideman Or something to that affect. Pictures below.
-
Thanks for the photos
-
A keyboard like the upper one is quite easy to make yourself, the most difficult parts is drilling the aluminium plate for the top. The body can just be cut from one piece of wood routed out to clear the mechanism.
-
Easy to make unless your like me, about as handy with a saw as I am short of patience for technical work as you describe. I'm the last guy to pick up a saw and drill and try to make something like the above keyboard. That's why I keep guys like Michael at Dancemaster busy.
-
"The keyboards seem a tad expensive to me at $75 for the one piece and $95-$150 for the two piece, mind you that is installed"
Hello all--
Need a reality check. What would be the price for custom work like this on the continent? and who would you recommend?
Thanks, regards, Steve