Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: michik on June 29, 2010, 07:44:22 AM

Title: Fabrication d'un accordéon diatonique
Post by: michik on June 29, 2010, 07:44:22 AM
Just found on youtube:

Fabrication d'un accordéon diatonique

Part 1: http://www.youtube.com/watch?v=KJu80tcrGkg
Part 2: http://www.youtube.com/watch?v=2Sb-t8ag3b0
Part 3: http://www.youtube.com/watch?v=S4vAFGlIHpw
Part 4: http://www.youtube.com/watch?v=lbg2vEHz2Ws
Part 5: http://www.youtube.com/watch?v=OI72yQjELi8
Part 6: http://www.youtube.com/watch?v=VI0W0o21KNg
Part 7: http://www.youtube.com/watch?v=Mdon9hWn_8c

Michael
Title: Re: Fabrication d'un accordéon diatonique
Post by: Christopher K. on June 29, 2010, 08:18:52 AM
Excellent videos, I could watch this type of stuff all day.

Having fingers so close to the job is a fact of life. But for a craftsman, like any other, who values his eyesight to do quality work it is surprising to me that he trusts his tools and materials so much. He should invest in some safety glasses.
Title: Re: Fabrication d'un accordéon diatonique
Post by: melodeon on June 29, 2010, 01:46:24 PM
Scares me...

And....  I wouldn't put some of that CraX   wood through my jointer, table saw or other cutting machines......sure way to scratch the beds and trash the blades...

Intereting designs and techniques..
he must be a machinist..looking at some of the equipment.
Title: Re: Fabrication d'un accordéon diatonique
Post by: Owen Woods on June 29, 2010, 03:01:21 PM
I can't say that I'm massively impressed with his technique, it all seems a bit haphazard. Like guaging the depth of a groove by milling a bit off and seeing whether it looks right or not. He made a mistake on the fingerboard (Video 1, 4'29''). Similarly with the bass levers. If it were me that kind of trial and error would only be done once and I would measure what looks right and do it the same next time! I'm presuming that since he's videoed this he must have made that particular model before. Having said all of that, in the last video his treble mechanisms look great fun. Very distinctive at any rate (:)
Title: Re: Fabrication d'un accordéon diatonique
Post by: pete /acorn on June 29, 2010, 06:44:34 PM
Hi,
Please do not copy this guys methods,he cuts wrong way with miller,good job stock timber well fixed,also using engineering milling machine,cutter speed far too slow,slowest speed on my overhead router is 18000 rpm,this is why sound on video is bumping.
Please be careful if not experienced,these tools bit,it is never the machines fault,always operator error.

Pete
Title: Re: Fabrication d'un accordéon diatonique
Post by: melodeon on June 29, 2010, 09:22:15 PM
As I posted...  " scares me".
Title: Re: Fabrication d'un accordéon diatonique
Post by: Andy Simpson on June 30, 2010, 12:58:52 AM
He's even failing to observe really elementary safety procedures like not grabbing the chuck whilst it's still spinning. Ask people who work like that and they'll tell you they'll be fine and there's no need to be that careful, then go and ask someone who's had a workshop accident and they'll tell you they thought they'd be fine and that there wasn't any need to be that careful until a piece of debris going several hundred mph obliterated one of their eyes or they found themselves sitting in the hospital with some of their fingers in a tupperware box full of ice.
Title: Re: Fabrication d'un accordéon diatonique
Post by: melodeon on June 30, 2010, 01:24:04 AM
" fingers in a tupperware box full of ice"

Actually it was a baggie..

Been there, done that.

Safety first.
Title: Re: Fabrication d'un accordéon diatonique
Post by: Steve C. on June 30, 2010, 01:33:00 AM
Reminds me of the recent thread about applying celluloid, with the person holding acetone-dripping plastic like stretching a pizza!
Title: Re: Fabrication d'un accordéon diatonique
Post by: Chris Ryall on June 30, 2010, 04:41:50 AM
Just watched track one.

I too expected some sort of gig - and maybe eye protection at the router?  
.. but getting wood splinters out of eyes is surgically .. relatively easy  :|glug

[edit] Got to the last one. Nice sexy mermaid I have to say. And Gaillard lives in "Whale Road".
         I love the way the sea gets into the souls of Biscay french .. just off there .. gota go ;D
Title: Re: Fabrication d'un accordéon diatonique
Post by: Simon on June 30, 2010, 08:01:07 AM
Please do not copy this guys methods,he cuts wrong way with miller...
Thanks. I doubted when I saw him using the router. Thought he must know what he was doing and that it was just my ignorance.  (:)
Title: Re: Fabrication d'un accordéon diatonique
Post by: Flanna on June 30, 2010, 08:02:58 AM
Hi,
Please do not copy this guys methods,he cuts wrong way with miller,good job stock timber well fixed,also using engineering milling machine,cutter speed far too slow,slowest speed on my overhead router is 18000 rpm,this is why sound on video is bumping.
Please be careful if not experienced,these tools bit,it is never the machines fault,always operator error.

Pete

I don't agree with this. I use a milling machine most work days to cut woods and other soft materials. There isn't a "wrong way" to cut. You can use either "conventional" or "climb" milling. One way (conventional) the cutting action opposes the tool movement and the other way (climb) the cutting action is the same direction as the tool movement. The method chosen depends on the material being cut, and the physical characteristics of the mill and tool. Obviously the stock has to be well clamped which ever method you use.

The mill in the videos is very strong, the tool is ideal for both cutting methods and wood mills easily with either method. The rotational speed of the cutter is dependent on the type of material, the depth of cut and the feed rate. The chap in the video is cutting quite deep, the fairly slow RPM of the tool allows him to use a perfectly acceptable feed rate. After all, he is only cutting a small number of short pieces of wood in a session, he's not a production line!

I don't like to cut too fast either. On small parts, slow cutting allows me better control and reduces the chance of flying splinters. He could be using goggles, if he wished. I think that is a personal choice. Perhaps he feels more comfortable cutting at a moderate rate without goggles than cutting at high speed and then needing to wear goggles, ear protectors etc. High speed cutting is very noisy, perhaps he doesn't want to disturb his neighbors!
Title: Re: Fabrication d'un accordéon diatonique
Post by: Stiamh on June 30, 2010, 03:58:23 PM
And Gaillard lives in "Whale Road".

Really? Balline is a dialect word, then?

SimplePortal 2.3.5 © 2008-2012, SimplePortal