Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: sqwzboxstudent on July 15, 2010, 08:18:04 PM

Title: more boom out of 2V MM
Post by: sqwzboxstudent on July 15, 2010, 08:18:04 PM
im toying with the idea of switching the MM reeds in my 2 voice to LM or maybe even LH .
the MM reeds are just too week for my style and i crave more boom! i dont suppose anyone has any sound clips of LH reeds in action so i could have a listen, or any advice , id be gratefull for any advice!
Title: Re: more boom out of 2V MM
Post by: Lars on July 15, 2010, 09:37:24 PM
What sort of box is in question?

A friend of mine plays a CBA, using LH almost exclusively out of his LMH 3 voice box. It sounds quite nice for the sort of music he plays, but I would not regard that sound as an all-purpose machine - the lack of a M voice just makes this sound a little weak IMO.

So a different, pleasing sound, but not 'more boom'.

I've done work on a hohner presswood model, with the objective of getting more boom. New italian reeds, modified blocks and chambers, modified holes in soundboard, and a whole lot of tweaking to get the RIGHT tuning (not just going wet, but finding the right sound for that box), and some other details did the trick. That box cut right through any sessions I brought it to.

You say the MM option is just too weak for your style. Well, perhaps you need a different kind of box, then? You can't make a 2 voice MM, MH, LH, or LM box sound like a 4 voice cajun box or a 3 voice musette box....
Title: Re: more boom out of 2V MM
Post by: sqwzboxstudent on July 15, 2010, 09:43:06 PM
its an A/D/G gabbanelli the main problem seems to be the higher notes... A row is great D row could be slightly louder and the G row is like a mouse on hellium!!! im sure rees said the reeds are top notch italian
Title: Re: more boom out of 2V MM
Post by: rees on July 15, 2010, 10:05:04 PM
No, not top notch. Cagnoni Machina if I remember correctly not TAM. Good enough reeds but as you say, weak on the high notes.
Title: Re: more boom out of 2V MM
Post by: sqwzboxstudent on July 16, 2010, 04:35:33 PM
yeah sorry mate got mixed up!
Title: Re: more boom out of 2V MM
Post by: Quebecois on July 17, 2010, 04:36:32 PM
I put Cagnoni Macchina reeds in two of my boxes, a one-row 2-voice in D with a flat reed block, and it screams throughout the range. Also a 4-voice with modified reed blocks Ariette in C. I would say the Cagnoni Macchina reeds sound better in the lower range and seem to lack projection on the higher notes, like the H set. It seems that a LMH would be ideal! But with only 2 voices you may find that LM would be fine.
Title: Re: more boom out of 2V MM
Post by: sqwzboxstudent on July 17, 2010, 09:09:05 PM
i was thinking that LM would be the better option, howd do u go about ordering  and swapping the reeds ???
Title: Re: more boom out of 2V MM
Post by: sqwzboxstudent on July 18, 2010, 08:47:26 PM
are reed blocks all the same size and fitting???
Title: Re: more boom out of 2V MM
Post by: Theo on July 18, 2010, 10:33:35 PM
Reed blocks for L reeds are usually taller than for M reeds.
SimplePortal 2.3.5 © 2008-2012, SimplePortal