Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: GbH on July 18, 2010, 11:19:09 PM

Title: Meh! Too hot for boxes?
Post by: GbH on July 18, 2010, 11:19:09 PM
Over the last couple of weeks, I've noticed a recurring problem, which has happened once again today.  The air button on my Mengascini suddenly starts to click and then gets jammed open.  When opening the bass end and having a fiddle, the problem is obvious - the the wooden block and pad that covers the hole has moved slightly and is getting stuck on a wood ledge at the corner of the casing.  The only reason I can find that suggests why this is happening is that the wax holding the block in position is sometimes getting soft (from the heat...), thus allowing the the block to travel along the metal arm that it's attached too and consequently ending up out of place. 

It's easy to fix the problem temporarily - just move the block back along the arm.  But what's to stop it happening again?  Is there anything that can be done to avoid the problem in the first place?
Title: Re: Meh! Too hot for boxes?
Post by: waltzman on July 18, 2010, 11:48:58 PM
You could remove the wax and use a (small) dollop of hot melt glue which has a much higher melting temp.
Title: Re: Meh! Too hot for boxes?
Post by: RGF on July 19, 2010, 05:02:52 AM
Or.........you could simply keep it cool with my "good for one beer" modification.
 :|glug
Title: Re: Meh! Too hot for boxes?
Post by: HallelujahAl on July 19, 2010, 07:16:52 PM
Quote
you could simply keep it cool with my "good for one beer" modification.


Ah yes, I can thoroughly recommend them!
 ;D
Title: Re: Meh! Too hot for boxes?
Post by: GbH on July 20, 2010, 12:06:40 AM
Or.........you could simply keep it cool with my "good for one beer" modification.
 :|glug

That's rather neat.  I assume it's just a beer mat on a stick?  Sadly, I don't think it would fit in my instrument.  Nor, indeed, do I have any beer mats.
Title: Re: Meh! Too hot for boxes?
Post by: RGF on July 20, 2010, 04:44:31 AM
Nope, not a mat. It's a "wooden nickel" of the sort that is given at tours of a local microbrew, redeemable for a pint at their sampling bar.

http://www.summitbrewing.com/home.php

(No affiliation...just a good local brew. And they give me melodeon parts.)

Bob
SimplePortal 2.3.5 © 2008-2012, SimplePortal