Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Broadland Boy on July 21, 2010, 11:55:06 PM

Title: grey 'marble' pattern plastic / celluloid availability
Post by: Broadland Boy on July 21, 2010, 11:55:06 PM
Latest MAD artifact arrived today, described as 'small' it has turned out to be miniature (sort of size that Emrock was planning IIRC)

Vital stats are:- 1 row ten button in C with two bass buttons, one either side of the air bleed on the LH front.

Keyboard stamped 'Germany', top (or bottom if talking note frequency) button missing, nice simple pattern fretted wood pallet cover with drilled equivalent over bass end.

7.5" x 4.25" over ends / bellows, which are 10 fold, when closed over ends its 7" and 9.5" long including keyboard.

Everything plays (although my great paws are rather big for it) its not far out of tune and sounds quite sweet - like an  overgrown mouth organ which is not surprising.

Internals yet to be investigated, I'm almost ready to start tuning the ancient Hohner - just got to bend and re temper a swiss file).

The ends where a Pokerwork has its decoration and keyboard are covered with a grey marble like pattern plastic which I guess is some sort of celluloid ? (haven't tried a match on it yet) and the keyboard end has been damaged with all the front and most the top and bottom plastic torn off, as I've seen this sort of finish on some of the Hohner club types is it a material which is currently available ?  I doubt a match is likely so would need enough for 2 identical 40 mm strips 24" long - sorry about the mixed units but I've got MAD so you should make allowances :)  and 5 x 7 for the keyboard.

If not available, it looks like the underlying wood may be beech so a strip, scrape and oil would probably stiill result in a nice little box, which I presume is a kiddy size product but nicely made (the corners are mitred BTW)

It has the look of 1950's / 60's school furniture, but it doesn't look quite as cheap and cheerful as the current mini melodeons - I'll pop up a piccy when I get the chance.

Richard
Title: Re: grey 'marble' pattern plastic / celluloid availability
Post by: Theo on July 22, 2010, 08:43:40 AM
Celluloid covered Hohners are usually built of plywood.

The marled material is known as pearloid by those in the know, or 'mother of toilet seat" by the lower orders.
 I think I have some grey pearloid.  To prepare it for applying to a box it should be soaked in a mixture of acetone and water to soften it. 
Title: Re: grey 'marble' pattern plastic / celluloid availability
Post by: Broadland Boy on July 22, 2010, 01:54:58 PM
Celluloid covered Hohners are usually built of plywood.

The marled material is known as pearloid by those in the know, or 'mother of toilet seat" by the lower orders.
 I think I have some grey pearloid.  To prepare it for applying to a box it should be soaked in a mixture of acetone and water to soften it. 

Thanks Theo, twice in fact, once for the identification of pearloid and once for making me dry out my keyboard, I'd just taken a swig of tea when I got to 'mother of toilet seat' and the inevitable happened :P 
(LdT, I've seen several similar comments, surely this should have a unique to melnet emote?)

Amongst my battery of solvents, abuse for the use of, Acetone does not currently feature, I had wondered if a hot air gun or its ancestral equivalent might have been used to bend this stuff over a contact adhesive, the wrap round on the keyboard edge is very tight. The box does appear to be tree rather than plywood and there is a layer of thin paper under the pearloid, which has a mother of pearl lustre in it and in daylight, also traces of green rather than grey.


If you find sufficient in your stores, let me know and I'll give you a bell to organise purchase.

Richard
Title: Re: grey 'marble' pattern plastic / celluloid availability
Post by: Andy Simpson on July 22, 2010, 02:26:11 PM
Amongst my battery of solvents, abuse for the use of, Acetone does not currently feature, I had wondered if a hot air gun or its ancestral equivalent might have been used to bend this stuff over a contact adhesive, the wrap round on the keyboard edge is very tight.

You can see how it's applied about a minute into this video....

http://www.youtube.com/watch?v=rYsSifiDapo
Title: Re: grey 'marble' pattern plastic / celluloid availability
Post by: Christopher K. on July 22, 2010, 03:47:29 PM
Quote
...The box does appear to be tree rather than plywood and there is a layer of thin paper under the pearloid, which has a mother of pearl lustre in it and in daylight, also traces of green rather than grey...

That's funny, you have to wonder about someone these old Hohner colors.. I have a 3-voice Club which I believe was built in 1939 (I met someone online who has the same box and he says that Morino built his in that year. Plus someone scribbled that date on the blocks of mine).

It's grey, as you can see (feldgrau?  :|glug). But when I unscrewed the keyboard cover to have a look underneath, I found that the underside of the celluloid cover was bright green! I guess the exposure to ambient sunlight over 70+ years faded the color, like an old car. I'm halfway tempted to take a cabinet scraper to it to see if it would come back, but halfway more sensible than that...

Title: Re: grey 'marble' pattern plastic / celluloid availability
Post by: Broadland Boy on July 22, 2010, 09:22:46 PM
Thanks Andy & cpsmart,

Will have a look at that Utoob next time I have the laptop near a broadband network.


Instead of a scraper, why not try a mild abrasive like silvo, T cut or similar paint / laquer cutting compound, if it is a surface effect you might rejuvenate it while keeping a polished surface, in fact, (if I remember that is) once I have 'totalled' the remains from this box I'll give it a try and report back on results - might need a nudge to remember

Now what was I going to do ??

Richard
SimplePortal 2.3.5 © 2008-2012, SimplePortal