Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: sqwzboxstudent on July 25, 2010, 12:12:56 PM
-
im just about to start refurbishing my old erica and was wandering if you can respray old celluloid????? there is also a reed thats broken on the g row , anyone know where i maybe able to pick one up, not sure what note it is yet but its an "out" one. this one has a plastic keyboard too, does that give any clue to the age?
-
How do you know the reed is "broken" ?
-
it doesnt play, ive not got round to checking yet but i think it is snapped off, (the reed tongue?
-
It could just be fouled or need to be gapped, and isn't necessarily snapped off. When I snapped a reed tongue in another box, it still played, but was much higher pitched because it was shorter. Of course if your reed broke so high up the tongue that it couldn't vibrate then it wouldn't sound at all but it's a thought.
-
Let me know which reed it is and I'll see if I've got one.
I could bring it to Dartmoor.
Spraying celluloid shouldn't be a problem.
I've seen many red Ericas sprayed black.
-
i checked the reeds and i cant see one missing, maybe theres a piece of dirt or something wedged in there??? the reeds are slightly coroded , would a nail file take that off? thanks rees!
-
i checked the reeds and i cant see one missing, maybe theres a piece of dirt or something wedged in there??? the reeds are slightly coroded , would a nail file take that off? thanks rees!
My preference FWIW would be one of these:
Glassfibre Scratch Brush (http://www.maplin.co.uk/Module.aspx?ModuleNo=3932&C=SO&U=strat15)
-
My preference FWIW would be one of these:
Glassfibre Scratch Brush (http://www.maplin.co.uk/Module.aspx?ModuleNo=3932&C=SO&U=strat15)
I've had one of these for years, and think it does a good job of cleaning rust off - that and a packet of Rizlas to slide under the reed....
Diane
-
ive had some interest in selling this box so i put it back together, AND IT STILL PLAYS!
-
MAD strikes again it's now sitting in my front room. It has 4 broken reeds all on the pull, do pull reeds go more than push?
I will try and get it playable and in tune and then think about what to do about the faded finish.
-
what about a purple respray ???
-
what about a purple respray ???
Yay!
-
Had it all appart on Sunday cleaned every thing and for lack of the parts I need I polished the case up and it now looks very smart in it's gently faded red finish. I had intended to strip of the covering and stain it down quite dark but may be tempted to just keep it as it is or may be spray it deep green (near black) or by popular demand may be deep purple.
On a more practical note, anyone got any old Hohne T reeds ?
I need:
1 x D/E (button 5 G row)
2 x F#/G (button 6 G row)
1 x E/ F# (button 7 D row)
-
if you spray it deep purple how about playing "smoke on the water" at the grand unveiling?
-
Four new reeds fitted on Monday, supplied by Theo (the reeds not the day) all went OK but I took it very slow and you can definitely see which ones I have replaced. Next will be the various damaged valves and then start on the tuning should be all over by Christmas at this rate.
-
are you still happy with ur purchase malcom? ! what colour are you gonna do it???
-
Still happy.
I have been playing around with Bill the Farmer's tuner, I have had a few problems which turned out to be all of my own making as I had my pc sat on the bare floor boards which were amplifying the the hard drive noise and being picked up the tuner. All is now well and I have calibrated it with my trusty tuning fork and then once I have checked the tuning fork at work I will map the pitch of all the reeds.
The lady in question.
-
have you swapped the carpet tacks for proper bellows pins yet!?
-
yes just the strap brackets (any old hohner strap brackets out there?) and the cloth on the grill and she will be complete.
-
well done!