Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: DoninOhio on July 28, 2010, 07:51:52 PM

Title: C#/D to D/D#
Post by: DoninOhio on July 28, 2010, 07:51:52 PM
Well, I cannot locate a used D/D# box, but I do have a C#/D box. Can the current reeds be retuned 1/2 step to D/D#? A tuner stated it "cannot be done, and would be better to put new reeds in the box" (@ >$1000.00 cost). I was under the impression that reeds could be retuned (up) 1/2 step without causing major concerns r/t reed breakage.

Don
Title: Re: C#/D to D/D#
Post by: rees on July 28, 2010, 09:54:34 PM
Half a step (a semitone) is fine.
C/C# reeds are often tuned up to C#/D.
Title: Re: C#/D to D/D#
Post by: Theo on July 28, 2010, 11:32:18 PM
I agree, but if the reeds have already been tuned up from C#/D then another semitones up would be too far.
Title: Re: C#/D to D/D#
Post by: DoninOhio on July 29, 2010, 12:11:39 AM
Theo:

The box is  a Weltmeister with original C#/D tuning. Anyone have recommendations for tuners in the states. I already know about Michael from Irishdancemaster, but would like others if known.

Don
Title: Re: C#/D to D/D#
Post by: LDbosca on July 29, 2010, 12:48:28 AM
Just wondering, what sort of effect would tuning reeds up a semitone have on the sound/tone quality and on the reed responsiveness and so forth? I'm thinking about tuning up my Saltarelle to C/C# next year when I get the B/C Gaillard but since it's a nice box I don't want to risk spoiling the reeds.

Luke.
Title: Re: C#/D to D/D#
Post by: rees on July 29, 2010, 12:52:26 AM
If done properly it will usually give a brighter sound.
Title: Re: C#/D to D/D#
Post by: LDbosca on July 29, 2010, 01:02:54 AM
If done properly it will usually give a brighter sound.

Merci Beaucoup.

Luke.
Title: Re: C#/D to D/D#
Post by: pgroff on July 29, 2010, 05:31:05 AM
If done properly it will usually give a brighter sound.

Rees,

I have seen boxes where retuning from C/C# to C#/D was done by tuning up every reed tongue, leaving the reeds extremely thin at the tips.  Although they were functioning well, my concern is that little metal was left for maintenance tuning as will always be necessary over the future life of that set of reeds.

I'm not much of an accordion tech, much more comfortable with concertina tuning.  As a concertina tuner and player I strongly prefer reed tongues that are not too thin at the tips.  So to carry this perspective over to the accordion question (perhaps inappropriately?) I tend to like the idea of moving the inside row reeds to the outside row and putting new reeds in for the inside row.

Always learning though, so I appreciate your different point of view that comes from more accordion experience.

PG
SimplePortal 2.3.5 © 2008-2012, SimplePortal