Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Andrew Culwell on August 07, 2010, 03:42:10 PM

Title: Tuning Devices
Post by: Andrew Culwell on August 07, 2010, 03:42:10 PM
Seen lot's of posts about tuning tables etc.  I'm looking to either make or buy a simple efficient tuning device.  I don't have a lot of technical know how or patience for building stuff so it has to be relatively easy to build or make.  Not a lot of money either since I'm a newbie and don't want to invest in a lot of expensive hardware.  Also Can someone advise me as to Tuners?  Thanks!

--Drew
Title: Re: Tuning Devices
Post by: waltzman on August 07, 2010, 04:39:08 PM
Drew,

Martin Quinn had a ten dollar I-phone App, remember?

Michael
Title: Re: Tuning Devices
Post by: HallelujahAl on August 07, 2010, 07:01:18 PM
Drew - I use an old set of concertina bellows, attached to a solid piece of wood on the bottom, and then an appropriately sized piece of wood secured on top of the bellows with a small airhole centred on one edge. As long as things are airtight almost any sort of flexible chamber will do I should imagine to pump air through a reed for tuning purposes. I just use concertina bellows as I happened to have loads of old sets of bellows lying around from my concertina repair-work that I do. But an old set of accordion bellows would do the trick nicely I should think.
AL
SimplePortal 2.3.5 © 2008-2012, SimplePortal