Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Fungusface on August 18, 2010, 01:40:48 PM

Title: Fine Set of Pins Easy made
Post by: Fungusface on August 18, 2010, 01:40:48 PM
Made from pop rivits with rivit removed pin can be made to suit you and washers 2mm centre holed makes them ideal
Title: Re: Fine Set of Pins Easy made
Post by: Steve_freereeder on August 18, 2010, 02:29:19 PM
Hmmm....
From your picture, it would seem that the projecting flanges on the shaft near the small head would make a mess of the interior of the hole in the wooden body of the instrument, and possibly make the pins difficult to remove again.  ???
Title: Re: Fine Set of Pins Easy made
Post by: Chris Ryall on August 18, 2010, 03:22:27 PM
Sorry - I tend to agree.  The adjective "Donald Ducked" springs to mind for some reason.  My own experience has been that the holes on different melodeon boxes tend to be different sizes. None of mine will do for a different box. And once you've rebored a hole .. nothing will do.
Title: Re: Fine Set of Pins Easy made
Post by: Malcolm Clapp on August 18, 2010, 04:44:42 PM
. And once you've rebored a hole .. nothing will do.

In desparation,  maybe screws...
Title: Re: Fine Set of Pins Easy made
Post by: Bill Young on August 18, 2010, 05:47:46 PM
Why bother, when the real things are so easy to come by? Then maybe not, if you're PNG at the seller. . .
Title: Re: Fine Set of Pins Easy made
Post by: Theo on August 18, 2010, 06:25:11 PM
. And once you've rebored a hole .. nothing will do.

In desparation,  maybe screws...

The box originally had screws....

I agree that the pop rivet pins look like a poor substitute for the proper pins.  The smooth shaft is important, those lumps on the pop rivet shaft will be prone to do a bit more damage to the hole every time they are taken in or out.
Title: Re: Fine Set of Pins Easy made
Post by: Andy Simpson on August 18, 2010, 08:37:55 PM
prone to do a bit more damage to the hole every time they are taken in or out.

That's it really, rivets aren't designed to come out easily...
Title: Re: Fine Set of Pins Easy made
Post by: Fungusface on August 19, 2010, 02:22:39 AM
Well I was obviously going to file down the wings as you call them I realise they cant be put in like that, but I always think its better than the guy that put in screw nails before I got it,which I will have to fill in and drill others, if it came to buying the real mccoy I can just wait till Theo gets them in,after all dealt with Theo for years.and strange thing is Im not that keen on many things south of Scotland,and yet find Theo and a few others ok.

Title: Re: Fine Set of Pins Easy made
Post by: Theo on August 19, 2010, 09:09:40 AM
I have the pins in stock, available on line in my shop (http://www.theboxplace.co.uk/purchase/italianbellowspins/prod_38.html).
Title: Re: Fine Set of Pins Easy made
Post by: Malcolm Clapp on August 19, 2010, 09:52:11 AM
...and strange thing is Im not that keen on many things south of Scotland...

Don't suppose you'll be visiting Oz any time soon then....    :P :P :P

Had a nice coldie waiting for you too; guess I'd better drink it myself!    :|glug
SimplePortal 2.3.5 © 2008-2012, SimplePortal